Specifications & Technical Parameters

1. Model Number: 5A26355G08

2. Operating Ambient Temperature: -10℃ ~ +55℃

3. Storage Temperature Range: -20℃ ~ +60℃

4. Relative Humidity: 5%–90% RH, non-condensing

5. Mounting Mode: Snap positioning + screw locking

6. Protection Performance: Anti-surge, anti-electromagnetic interference

7. Design Service Life: ≥50000 working hours

8. Connection Mode: Standard pluggable terminal wiring

Complete Product Manual

1. Pre-installation Inspection

2. Installation Instructions

1. Position and fasten the module strictly according to equipment assembly drawings, tighten fasteners with specified torque value; over-tightening is forbidden to prevent shell deformation.

2. Clearly differentiate power terminals and signal terminals during wiring, lock connectors securely to avoid poor contact, open circuit or sudden signal loss.

3. Do not install the module in areas with corrosive liquid, heavy dust accumulation, sustained high temperature or intensive electromagnetic radiation sources.

3. Operation Specifications

1. Recheck all wiring connections thoroughly before the first power-on; conduct a 3–5 minute no-load test run. Enable full-load operation only if no abnormal noise or excessive temperature rise is detected.

2. Operate strictly within rated technical indicators; long-term overload or overvoltage operation is strictly prohibited.

3. Regularly monitor module surface temperature and connector fastening status during operation. Cut off the main power supply and shut down the equipment for troubleshooting once any abnormality occurs.

4. Maintenance & Upkeep

1. Cut off the overall power supply and clean dust and grease on terminals every 3 months for routine maintenance.

2. Inspect the tightness of fixing fasteners once per year, replace aging cables and damaged plugs promptly.

3. Unauthorized disassembly of internal precision components is prohibited; maintenance operated by non-professional personnel will void the product warranty.

5. Storage Requirements

6. Simple Troubleshooting

1. No response from host equipment: Inspect power cables and connectors for detachment or open circuits.

2. Signal jitter and intermittent operation: Eliminate external electromagnetic interference and retighten loose wiring terminals.

3. Abnormal overheating: Verify overload running condition; power off and cool down completely, then recheck actual load parameters.

7. Safety Warnings

1. Plugging or unplugging wires and disassembling the module are forbidden under live operating conditions.

2. Fully disconnect the main power supply and wait for complete capacitor discharge before any maintenance operations.

3. Scrapped modules must be recycled as industrial electronic waste following local environmental protection regulations; random discarding is prohibited.

Application Fields

1. Automated assembly and production lines

2. CNC machinery and electromechanical control units

3. Precision testing instruments and detection equipment

4. Intelligent warehousing and logistics conveying systems

5. Full-set industrial automation control systems

6. Auxiliary automation equipment for packaging, metallurgy and mechanical processing industries