Specifications & Technical Parameters

1. Model Number: 5A26355G07

2. Operating Ambient Temperature: -10℃ ~ +55℃

3. Storage Temperature Range: -20℃ ~ +60℃

4. Relative Humidity: 5%–90% RH, non-condensing

5. Mounting Mode: Snap positioning + screw locking

6. Protection Performance: Anti-surge, anti-electromagnetic interference

7. Design Service Life: ≥50000 working hours

8. Wiring Connection: Standard plug-in terminal connection

Product Manual

1. Pre-installation Inspection

2. Installation Requirements

1. Fix the module strictly according to equipment assembly drawings, tighten fasteners with specified torque; over-tightening is forbidden to prevent casing deformation.

2. Clearly separate power terminals and signal terminals during wiring, fasten connectors tightly to avoid poor contact, open circuit or sudden signal loss.

3. Do not install the module in environments with corrosive liquids, heavy dust accumulation, long-term high temperature or strong electromagnetic radiation sources.

3. Operation Specifications

1. Recheck all wiring connections before the first power-on, carry out a 3–5 minute no-load trial run. Switch to full-load operation only if no abnormal noise and excessive temperature rise are detected.

2. Operate within rated technical indicators; prolonged overload or overvoltage operation is strictly forbidden.

3. Periodically check the module temperature and fastening state of connectors during operation. Cut off the main power supply and shut down equipment for troubleshooting immediately once any abnormality occurs.

4. Maintenance Instructions

1. Cut off the total power supply and remove dust and grease on terminals every 3 months for regular maintenance.

2. Check the tightness of fixing screws annually, replace aging cables and damaged plugs in a timely manner.

3. Unauthorized disassembly of internal precision components is prohibited; maintenance conducted by non-professional personnel will void the product warranty.

5. Storage Conditions

6. Basic Troubleshooting

1. Host device no response: Check power lines and connectors for detachment or open circuits.

2. Signal jitter and intermittent operation: Eliminate external electromagnetic interference and retighten loose wiring terminals.

3. Abnormal overheating: Check whether the module is running under overload; power off for full cooling, then recheck actual load parameters.

7. Safety Warnings

1. Plugging/unplugging wires and disassembling the module are forbidden under live state.

2. Fully disconnect the main power supply and wait for complete capacitor discharge before carrying out any maintenance work.

3. Discarded modules must be recycled as industrial electronic waste in compliance with local environmental regulations; random disposal is prohibited.

Application Fields

1. Automatic assembly production lines

2. CNC equipment and electromechanical control units

3. Precision testing instruments and inspection equipment

4. Intelligent warehousing and logistics conveying systems

5. Complete industrial automation control systems

6. Automated supporting facilities for packaging, metallurgy and machining industries