Specifications & Technical Parameters

1. Model No.: 5A26355G06

2. Operating Temperature: -10℃ ~ +55℃

3. Storage Temperature: -20℃ ~ +60℃

4. Relative Humidity: 5%–90% RH, non-condensing

5. Mounting Type: Snap positioning + screw fastening

6. Protection Capability: Anti-surge, anti-electromagnetic interference

7. Design Service Life: ≥50000 working hours

8. Connection Form: Standard plug-in terminal connection

Product Manual

1. Pre-installation Inspection

2. Installation Requirements

1. Locate and fix the module strictly following the equipment assembly drawing; tighten fasteners with specified torque. Over-tightening shall not be allowed to prevent shell deformation.

2. Clearly distinguish power terminals and signal terminals during wiring, lock connectors securely to avoid poor contact, open circuit or signal interruption.

3. Do not install the module in environments with corrosive liquid, heavy dust, sustained high temperature or intensive electromagnetic radiation.

3. Operation Specifications

1. Double-check all wiring before initial power-on, conduct a 3–5 minute no-load test run. Full-load operation can be launched only if no abnormal noise and excessive temperature rise are observed.

2. Operate within rated parameters all the time; long-term overload or overvoltage operation is strictly prohibited.

3. Regularly monitor module temperature and connector tightness during running. Cut off main power and shut down equipment for troubleshooting immediately once any abnormality occurs.

4. Maintenance Rules

1. Cut off total power supply and clean dust and oil stains on terminals every 3 months for routine maintenance.

2. Check the tightness of fixing fasteners once a year, replace aging cables and damaged plugs in a timely manner.

3. Unauthorized disassembly of internal precision components is forbidden; maintenance by non-professional personnel will invalidate the warranty.

5. Storage Conditions

6. Simple Troubleshooting

1. No response from host equipment: Check power lines and connectors for disconnection or detachment.

2. Signal fluctuation & intermittent operation: Eliminate external electromagnetic interference and retighten loose wiring terminals.

3. Abnormal overheating: Confirm overload operation status; power off for full cooling and recheck actual load parameters.

7. Safety Warnings

1. Cable plugging/unplugging and module disassembly are prohibited under live conditions.

2. Completely disconnect main power supply and wait for full capacitor discharge before any maintenance work.

3. Scrapped modules must be recycled as industrial electronic waste in accordance with local environmental regulations; arbitrary discarding is prohibited.

Application Fields

1. Automated assembly production lines

2. CNC machinery and electromechanical control equipment

3. Precision inspection instruments and detection devices

4. Intelligent warehousing and logistics conveying systems

5. Complete sets of industrial automation control systems

6. Automated supporting equipment for packaging, metallurgy and machining industries