Specifications & Technical Parameters

1. Model Number: 5A26355G05

2. Working Ambient Temperature: -10℃ ~ +55℃

3. Storage Temperature Range: -20℃ ~ +60℃

4. Relative Humidity: 5%–90%, non-condensing

5. Mounting Method: Buckle positioning + screw locking

6. Protection Features: Anti-surge, anti-interference

7. Rated Design Lifespan: ≥50000 working hours

8. Connection Mode: Standard pluggable terminals

Product Manual

1. Pre-installation Check

2. Installation Guidelines

1. Fix the component strictly in accordance with the equipment assembly drawing, tighten fasteners with designated torque value; excessive tightening is prohibited to prevent housing deformation.

2. Differentiate power ports and signal ports clearly during wiring, fully lock connectors to avoid poor contact, open circuits or sudden signal loss.

3. Do not deploy the module in locations with corrosive fluids, heavy dust accumulation, persistent high temperature or strong electromagnetic radiation sources.

3. Operation Regulations

1. Recheck all wiring connections before the first power-on. Perform a 3–5 minute no-load trial run. Only put it into full-load operation if no abnormal noise or excessive temperature rise is detected.

2. Keep operation within rated technical indicators; long-term overload or overvoltage running is strictly forbidden.

3. Regularly check the module temperature and connector tightness during operation. Cut off the main power supply and shut down the equipment for inspection immediately once faults appear.

4. Maintenance Instructions

1. Cut off the overall power supply and clean dust and grease on terminals every 3 months for routine upkeep.

2. Inspect the tightness of fixing screws annually, replace aged cables and damaged plugs promptly.

3. Disassembling internal precision structures without authorization is prohibited. Repair by non-professional staff will void the product warranty.

5. Storage Requirements

6. Basic Troubleshooting

1. Host device fails to respond: Check power cables and connectors for detachment or open circuits.

2. Signal jitter and intermittent operation: Eliminate external electromagnetic interference and retighten loose terminals.

3. Unusual overheating: Verify overload operation; power off and cool down completely, then recheck actual load parameters.

7. Safety Notices

1. It is forbidden to plug/unplug wires or disassemble the module when the equipment is live.

2. Disconnect the main power supply completely and wait for capacitors to fully discharge before carrying out maintenance work.

3. Discarded modules shall be recycled as industrial electronic waste complying with local environmental laws; random disposal is not allowed.

Application Fields

1. Automatic assembly and production lines

2. Numerical control equipment and electromechanical control units

3. Precision detection instruments and testing equipment

4. Intelligent storage and logistics conveying systems

5. Complete industrial automation control systems

6. Packaging, metallurgy and machining automated supporting facilities