This cable serves as a dedicated physical signal transmission link connecting Ovation I/O modules, rack backplanes and cabinet signal transfer panels. It stably transmits analog process sampling signals, digital equipment status feedback signals and safety interlock control signals. Equipped with gold-plated lockable precision connectors at both ends and a complete multi-layer EMI/RFI shielding structure, it effectively suppresses electromagnetic interference inside control cabinets and avoids typical issues including analog signal drift, accidental digital signal triggering and communication jitter. It is widely applied to complete cabinet assembly, on-site unit renovation upgrade and spare parts stocking in thermal power, petrochemical and other continuous process industries.

This prefabricated cable assembly adopts industrial-grade shielded cable with factory fixed length, and precisely crimped matched locking connectors are installed at both terminals. One connector plugs into the dedicated signal interface of Ovation I/O modules or rack backplane ports, while the other connects to cabinet terminal blocks or signal transfer panels, realizing point-to-point hard wiring connection between the control layer and field wiring terminals.

Each finished cable undergoes strict outgoing quality inspection to eliminate defects such as open circuits, short circuits, miswiring and insufficient crimping, fully adapting to the 24/7 non-stop continuous operation and long-term vibration working conditions of industrial control cabinets.

Customized for analog and digital signal loops inside Ovation control cabinets. Strict one-to-one pin mapping eliminates risks of signal crosstalk and misconnection, ensuring accurate collection of field process parameters and reliable issuance of safety interlock control commands.

It adopts a composite structure of overall braided copper mesh shielding plus independent shielding for each individual core wire. This structure isolates EMI and RFI interference generated by cabinet contactors, variable frequency drives and cooling fans, greatly reducing analog measurement deviation and accidental digital signal triggering caused by external noise.

Both ends are fitted with industrial gold-plated connectors integrated with snap locking latches. Gold-plated pins reduce contact resistance and resist oxidation and corrosion in humid cabinet environments. The locking structure prevents poor contact resulting from long-term equipment vibration and guarantees long-term stable connection reliability.

The outer sheath is made of high-tensile flexible flame-retardant insulating material, resistant to oil mist, dust and cyclic temperature fluctuations inside power plant cabinets. It features excellent bending fatigue resistance and fits fixed routing and limited bending layout; no insulation cracking or core wire breakage occurs after repeated plugging and long-term vibration.

No adapters, on-site wiring modification or secondary crimping work is required. It directly mates with standard interfaces of full-series Ovation I/O modules, rack backplanes and transfer panels, perfectly matching the Ovation distributed control platform and simplifying on-site installation, fault troubleshooting and spare part replacement work.

Supplied as pre-assembled fixed-length finished cable with unified cable ID tags and pin number labels, facilitating cable sorting, identification and subsequent circuit maintenance inside cabinets, and significantly shortening the on-site engineering wiring and commissioning cycle.

Model Number: 5A26355G01Product Type: Signal Interconnect Cable AssemblyConnectors: Mated locking precision connectors on both endsTransmitted Signals: Analog process sampling signals, digital equipment status signals, safety interlock control signalsShielding Structure: Dual-layer overall braided shielding + independent core wire shieldingAnti-Interference Performance: Complete EMI/RFI suppression, high signal integrityInsulation Resistance: ≥100 MΩ tested at 500 VDCDielectric Withstand Voltage: 1000 VAC between conductors and shielding layerOperating Ambient Temperature: 0 ℃ ~ +60 ℃Storage & Transportation Temperature: −40 ℃ ~ +85 ℃Relative Humidity: ≤95% RH, non-condensingEMC Compliance: Complies with industrial G3 anti-corrosion standard and anti-interference requirements for power plant control cabinetsRated Mating Cycles: ≥1000 reliable plug/unplug operations

Used for internal signal wiring inside boiler, turbine and generator main control cabinets and auxiliary control racks, realizing stable transmission of temperature, pressure, flow and other analog signals as well as equipment switch status digital signals.

Installed in control cabinets of reactors, fractionation units and compressor sets to connect I/O cards and terminal transfer panels, ensuring stable signal transmission for safety interlock chains and continuous process regulation loops.

Adopted for fixed signal interconnection inside automation control cabinets, supporting long-cycle unattended safe and stable operation of the entire Ovation DCS production control system.