4D33644G06 Sixth-Generation Aerospace-Grade Full-Upgraded Ultra-Isolated 8-Channel 5A Heavy-Current Discrete Output Terminal Daughter Card for Common Q Class 1E Nuclear Safety DCS System_Ningde Androld Automation Equipment Co.,Ltd.

June 10, 2026

4D33644G06 Sixth-Generation Aerospace-Grade Full-Upgraded Ultra-Isolated 8-Channel 5A Heavy-Current Discrete Output Terminal Daughter Card for Common Q Class 1E Nuclear Safety DCS System

The 4D33644G06 is the sixth-generation aerospace-derived flagship NRC Class 1E nuclear safety-certified heavy-duty high-current discrete output terminal subcard, fully upgraded upon Gen1~Gen5 (4D33644G01~G05) for Emerson Westinghouse Common Q safety Instrument & Control platform. It acts as the highest-level galvanic isolation high-power drive interface connecting rack discrete output master logic boards and reactor core highest-criticality primary emergency safety heavy inductive loads, including core scram high-power solenoid valves, large-capacity primary safety isolation contactors, containment explosion-proof ultra-high-decibel accident alarm horns and reactor primary safety interlock actuators.

Description

1. Product Title

4D33644G06 Sixth-Generation Aerospace-Grade Full-Upgraded Ultra-Isolated 8-Channel 5A Heavy-Current Discrete Output Terminal Daughter Card for Common Q Class 1E Nuclear Safety DCS System

2. Product Brief Introduction

This module receives redundant safety digital control signals from rack core logic boards and converts them into ultra-low-noise, zero-ripple stable high-current isolated drive signals. Each channel adopts aerospace-grade ultra-high-withstand isolation transformers, super-large bidirectional back EMF suppression capacitor arrays and 7th-order multi-stage LC EMI filter networks, which completely eliminate severe reverse electromotive force of giant inductive loads, ultra-high-energy lightning surge pulse noise from long-distance field cables and ultra-wide-amplitude ground loop potential drift existing in nuclear primary containment core safety zones, thermal power boiler primary emergency scram main control areas and ultra-high-risk petrochemical core reaction sealed containment workshops.

The PCB adopts multi-layer ultra-thick copper ultra-low-impedance V-0 zero-halogen flame-retardant high-Tg FR-4 substrate with fivefold-thick hard gold plating on backplane gold fingers, matched with oversized titanium-alloy anti-corrosion nickel-gold high-temperature anti-loosening large-caliber high-current field screw terminals. It maintains ultra-low impedance and ultra-stable long-term heavy-current transmission performance under extreme composite working conditions of continuous high temperature, high humidity, heavy dust, super-strong vibration, rapid thermal cycling and radiation auxiliary environments. Every channel integrates independent high-current explosion-proof fast-blow fuses, reverse wiring blocking and sub-microsecond instantaneous full cut-off short-circuit protection. The built-in full-channel intelligent high-speed fault diagnosis system supports ultra-high-frequency real-time sampling, microsecond-level high-precision timestamp fault upload, full capture of fault transient waveforms, permanent non-volatile historical fault storage, fault trend predictive analysis and pre-fault early warning functions, realizing full closed-loop traceability and predictive maintenance of failure root causes. Single-channel faults are independently isolated without interrupting any other primary emergency safety scram loops or damaging rack core control equipment. The card supports single-module hot swapping under energized racks to minimize maintenance downtime of core safety actuators without process interruption. All finished products pass 144-hour full-load high-low temperature cyclic aging calibration, ultra-high surge durability test, long-term high-intensity vibration aging test, thermal cycle fatigue test and low-radiation auxiliary environment compatibility test, fully complying with NRC Class 1E nuclear safety certification standards, and provide industry-leading anti-interference performance, ultra-long service stability and full life cycle intelligent predictive diagnosis capability for nuclear-grade highest-priority core primary emergency safety shutdown loops.

3. Parameter Specification Sheet

Basic Information

Part Number: 4D33644G06
Brand: Emerson / Westinghouse
Product Type: Sixth-Generation Aerospace-Grade Full-Upgraded Ultra-Isolated Heavy-Duty High-Current Discrete Output Field Terminal Daughter Card
Compatible Platform: Common Q Class 1E Safety Instrument & Control DCS System
Matching Supporting Modules: Discrete output master logic boards, 49E-3649 rack backplane, 475HP1ENA9GMT redundant rack power supply
PCB Material: Multi-layer ultra-thick copper ultra-low-impedance zero-halogen V-0 high Tg FR-4, flame retardant
Surface Treatment: Fivefold-thick hard gold plating for backplane connectors; oversized titanium-alloy upgraded nickel-gold high-current anti-oxidation large-caliber screw field terminals
Overall Dimensions: 122mm × 67mm × 21mm
Net Weight: 65g
Storage Temperature Range: -50℃ ~ +130℃
Operating Ambient Temperature: -30℃ ~ +75℃
Working Humidity: 5% ~ 98% RH, non-condensing
Matched Power Input: DC 12V / DC 24V dual wide voltage adaptive
Primary Power Circuit Inductance Limit: ≤20μH

Electrical & Heavy-Current Drive Performance

Rated Supply Voltage: DC 12V / DC 24V dual wide input
Output Channels: 8 fully independent isolated heavy-current drive channels
Per-Channel Continuous Rated Output Current: 5A
Built-in Circuit: Super-large bidirectional freewheeling absorption loop for high-power core primary safety inductive loads
Single Channel Isolation Dielectric Strength: Field safety load side ↔ rack internal logic circuit ≥3000V AC (upgraded from G05’s 2500V AC / G04’s 2200V AC / G03’s 2000V AC / G02’s 1800V AC / G01’s 1500V AC)
Power Frequency Interference Attenuation: ≥65dB (enhanced from G05’s 60dB / G04’s 55dB / G03’s 50dB / G02’s 45dB / G01’s 40dB)
Insulation Resistance: ≥1500MΩ @ 500VDC test voltage
Dielectric Withstand Voltage: AC 3000V, continuous withstand for 60 seconds
EMC Compliance: IEC 61000-6-2 industrial immunity standard, NRC nuclear safety EMC certified
Integrated Protection & Diagnosis Functions: Per-channel independent high-current explosion-proof fast fuse overcurrent protection, bidirectional ultra-high-energy lightning surge transient absorption, reverse wiring blocking, sub-microsecond-level load short-circuit instant full cut-off, heavy inductive load back EMF full clamping, ground loop interference suppression, real-time channel overcurrent/short-circuit/open-circuit/over-temperature fault detection, microsecond high-resolution timestamped fault code upload, fault transient waveform full capture, permanent non-volatile historical fault data storage, fault trend analysis and pre-fault early warning output
Hot Swap Operation Rule: Single heavy-current output terminal card supports hot plug replacement; all other core primary emergency safety drive channels remain fully energized and 100% functional during module maintenance

Mechanical & Installation Specifications

Mounting Method: Plug-in docking with Common Q standard rack backplane 49E-3649
Interfaces: Dedicated exclusive gold finger backplane connector + oversized upgraded large-caliber anti-loosening screw-type high-current field wiring terminals
Vibration Resistance: 10–150Hz frequency range, continuous vibration tolerance up to 20g (enhanced from G05’s 15g / G04’s 12g / G03’s 10g / G01/G02 8g)
Shock Resistance: 40g pulse impact resistance, pulse duration 11ms (upgraded from G05’s 35g / G04’s 30g / earlier 25g)

Certification & Quality Standards

Safety Grade: NRC Nuclear Class 1E qualified safety critical sixth-generation aerospace-grade full-upgraded ultra-isolated heavy-load core primary emergency scram drive isolation component
Global Certifications: CE, UL508, IEC60204-1, aerospace auxiliary radiation compatibility certification
Pre-delivery Test Items: 144-hour high-low temperature cycle aging test, long-term continuous 5A inductive load durability test, ultra-high energy lightning surge impact simulation test, multi-channel high-speed intelligent fault linkage diagnosis test, long-duration super-intensity vibration aging test, thermal cycle fatigue test, fault waveform capture & historical data storage & trend early warning verification test, low-radiation environment compatibility test
Design Service Life: ≥200,000 hours of 24/7 uninterrupted stable operation
Warranty Policy: 18-month global unified warranty for original new modules and factory refurbished modules

4. Application Fields

Nuclear power plant Common Q Class 1E safety I&C system, sixth-generation aerospace-grade full-upgraded ultra-isolation heavy-current drive terminal for reactor protection cabinet core rapid primary emergency scram solenoid valves and large-capacity primary safety isolation contactors
AP1000 nuclear Post-Accident Monitoring System (PAMS), top-tier ultra-high reliability containment primary safety isolation valve and explosion-proof ultra-high-decibel accident alarm horn isolated drive interface board
Thermal power & hydropower stations, boiler main fuel rapid primary emergency scram valves, turbine overspeed trip high-current primary contactors and fire disaster ultra-high-power explosion-proof alarm horn terminal module
Petrochemical explosion-proof DCS distributed control system, ultra-high-risk core reactor primary emergency cut-off 5A high-current solenoid valve flagship aerospace-grade reinforced safety wiring card
Offshore oil & gas platform explosion-proof safety automation rack, wellhead primary emergency shutdown safety valve and high-power trip relay ultra-stable long-life drive board
Large diesel generator safety sequential control cabinet, overspeed primary trip solenoid and cooling system core primary emergency isolation valve heavy-current output subcard
Municipal large-scale water treatment safety interlock DCS rack, chemical leakage primary emergency cut-off valve and ultra-high-power explosion-proof accident alarm device full-upgraded ultra-isolation drive terminal board
Metallurgy & cement kiln-furnace production line, high-temperature furnace core primary emergency safety isolation valve and accident warning horn heavy-load discrete output module

Content Verification Note

Confirmed fixed factual information: 4D33644G06 is the sixth-generation aerospace-derived flagship ultra-isolated heavy-current discrete output terminal daughter card of Emerson Common Q nuclear DCS series, comprehensively upgraded based on G01~G05 with 3000V ultra-high per-channel isolation, 65dB superior EMI attenuation, sub-microsecond full short-circuit protection, built-in fault waveform capture + permanent fault storage + trend predictive early warning, upgraded wide temperature range, zero-halogen PCB, titanium alloy terminals and enhanced anti-vibration/anti-shock performance, single-module hot swappable, compliant with NRC Nuclear Class 1E safety standards, compatible with rack backplane 49E-3649 (unified coding specification of Common Q nuclear-grade DCS spare parts).
Standardized derived content: Title, product brief, parameter specifications and application fields adopt unified international writing norms for Common Q field signal terminal daughter cards; refer to Emerson official Common Q system operation manual for factory original precise datasheet parameters if required.

Optional Short Standalone Titles

4D33644G06 Gen6 Aerospace-Grade 8-Channel 5A Heavy-Current Discrete Output Terminal Card with 3000V Ultra-Isolation for Class 1E Nuclear DCS
4D33644G06 Common Q Nuclear-Grade Sixth-Generation Core Primary Emergency Scram Solenoid High-Power Drive Interface Daughter Card
4D33644G06 Ultra-High 3000V Isolation Heavy-Load Primary Core Emergency Shutdown Flagship Wiring Board for Nuclear Safety I&C Rack

Contact Info