Emerson 1C31233G04 | Compact 16-Channel Digital Output Module
Product Introduction
1C31233G04 is Emerson Ovation compact discrete output module originated from Westinghouse design, installed on standard Ovation remote I/O rack. It converts digital bus command into field on/off drive signal to control solenoid valves, field relays, alarm indicators and small contactors, widely used as spare component for thermal power and petrochemical DCS interlock control cabinet。
Description
Part Code Definition
1C31xxx = Ovation compact remote I/O module series;233 = hardware code for 16-channel compact digital output;G04 = fourth generation hardware revision version。
Technical Specifications
Backplane powered via rack internal bus;Total 16 independent isolated digital output channels, rated 24VDC field output;Single channel max carrying current: 0.5A, each channel equipped with independent short-circuit protection;Galvanic isolation between field side and backplane: 500VDC withstand voltage;Operating ambient: -40℃ ~ +70℃, 5%~90%RH non-condensing;Hot-swap supported on Ovation standard I/O rack; dimension:121×52×165mm, net weight approx 0.32kg。
Interface & Communication Layout
Rear golden finger plugs into rack backplane to realize Ovation system bus data transmission;Front terminal block for field load wiring of relay, solenoid and alarm equipment;Front panel LED indicators including RUN running lamp, module fault alarm and individual channel on/off status display。
Core Functions
Binary switching output for equipment interlock, sequential control and field alarm triggering;Per-channel independent overload & short-circuit protection, single channel fault will not affect remaining 15 output points;Built-in hardware self-diagnosis for open-circuit, overload and internal circuit fault, fault information uploaded to Ovation host controller automatically;Online hot plug replacement without cutting off rack power during field maintenance。
Application Scenarios
Boiler auxiliary equipment interlock control, turbine oil system solenoid drive, furnace blow-out alarm output in thermal power plants; petrochemical process interlock cabinet spare replacement and DCS system I/O expansion project。
Operation & Maintenance Notes
Use shielded twisted-pair for field output wiring, single-end shield grounding inside control cabinet;Separate digital signal cables from high-current AC power cables to avoid EMI interference;Regularly check terminal screw tightness and output channel action status during routine equipment inspection。
Get a Quote