Model Explanation

51195066-100

51195066: Basic model (5-slot chassis power supply)

-100: Hardware version / configuration code (standard version)

Alternative name: HF-75632-F (internal model of the module) Technical Specifications

Input voltage: 120VAC / 240VAC adaptive, 47–63Hz

Input current: 6.0A at 120V; 3.75A at 240V

Output voltage/current:

+5VDC @ 30A (main power supply) +12VDC @ 8A

-12VDC @ 1A

+24VDC @ 1A

Power: Approximately 200W

Operating temperature: 0°C ~ +50°C

Environmental humidity: 5%–95% (no condensation)

Weight: Approximately 4.6kg

Size: Standard 5-slot chassis power specification, compatible with TDC3000 chassis

Interface and communication configuration

Input interface: IEC standard power socket, compatible with 120/240VAC mains power

Output interface: Backplane bus interface of the chassis, direct supply for 5-slot card components

Status indication: Power normal (PWR OK), fault (FAULT) LED indicator

No communication interface: Pure power module, responsible for power supply only and does not participate in data communication

Core functions

Multi-channel voltage regulation output: Provide stable +5V, ±12V, +24V DC power supply for the card components in the chassis

Overcurrent / Overvoltage protection: Automatically protect when there is short circuit, overcurrent, or overvoltage output, to avoid damaging the card components

Redundant configuration: Support dual power redundancy configuration to enhance the reliability of system power supply

Plug-and-play: Compatible with TDC3000 5-slot chassis, automatically matches power supply after installation Applicable scenarios

Honeywell TDC3000/TPS System 5-slot Control Station Cabinet

DCS control station for process industries such as chemical, power, metallurgy, oil and gas

Project for replacing old system power supply, backup of spare parts, and system maintenance

User and maintenance instructions

Installation: Insert into the power slot of the cabinet while the power is off, tighten the screws, and connect to the mains power

Commissioning: After powering on, check the LED indicators. If the PWR OK light is on, it indicates normal power supply

Maintenance: Regular dust cleaning, check the connection of input/output interfaces; avoid humid and dusty environments