1. Electrical Parameters

• Rated Working Voltage: DC 24V ±10% (stable power supply, no voltage fluctuation affecting performance)

• Voltage Tolerance: ±10% (supports short-term voltage fluctuation without component damage)

• Operating Current: ≤ 2A (normal working state), peak current ≤ 3A (short-term, ≤ 5s)

• Power Consumption: ≤ 15W (normal operation), no abnormal heating

• Insulation Resistance: ≥ 100MΩ (at 500V DC), ensuring electrical safety and no leakage

• Dielectric Strength: 1500V AC, 1 minute (no breakdown, no arcing)

2. Environmental Parameters

• Operating Ambient Temperature: 0℃ ~ +55℃ (industrial standard working range, no performance degradation)

• Storage Temperature Range: -20℃ ~ +70℃ (can be stored for a long time without component damage)

• Relative Humidity: 10% ~ 90% (non-condensing), no moisture damage to components

• Altitude: ≤ 2000m (normal operation, no performance loss at high altitude)

• Vibration Resistance: 10 ~ 500Hz, acceleration 10m/s² (meets workshop vibration environment)

• Shock Resistance: 50m/s², 11ms (prevents damage during transportation and installation)

3. Electromagnetic Compatibility (EMC)

• Emission Standard: Complies with IEC 61000-6-4 (industrial emission requirements)

• Immunity Standard: Complies with IEC 61000-6-2 (resists industrial electromagnetic interference)

• Anti-interference Performance: Built-in electromagnetic shielding layer, anti-radiation and anti-conduction interference, suitable for complex workshop electromagnetic environments

• Static Protection: ±2kV (contact), ±4kV (air), effectively preventing static damage to components

4. Mechanical and Installation Parameters

• Installation Type: Standard slot plug-in (matches FANUC CNC equipment standard slot)

• Board Thickness: 1.6mm (industrial standard thickness, strong structural stability)

• Overall Dimensions: Consistent with FANUC original PCB board (compatible with existing installation positions)

• Fixing Method: 4 mounting holes, matching standard screws (M3), easy to install and disassemble

• Weight: ≤ 150g (lightweight, convenient for installation and transportation)

• Interface Type: Standard FANUC CNC signal interface, plug-and-play, no need to modify the host program

5. Operating Performance Parameters

• Continuous Operation: Supports 24-hour uninterrupted stable operation, no performance degradation

• Response Time: ≤ 10ms (signal processing and transmission, ensuring real-time control)

• Signal Transmission Rate: ≥ 1Mbps (stable data transmission, no packet loss)

• Fault Tolerance: Built-in self-detection function, able to automatically identify minor faults and send alarm signals

• Service Life: ≥ 50,000 hours (normal industrial working conditions, no component aging failure)

6. Quality and Safety Standards

• Compliance Standards: Meets FANUC CNC system hardware standards, IEC 60950-1 (electronic safety standard)

• Component Standard: All electronic components adopt industrial-grade products, passing strict screening and aging tests

• Safety Protection: Built-in overcurrent, overvoltage, overheating protection functions, automatically cut off power when abnormal to protect the board and host equipment

• RoHS Compliance: Meets EU RoHS environmental standards, no harmful substances, environmental protection and safe use

Supplementary Notes