1.

2. Product Type and Core Function

3. Code Explanation

• Series Code: A02B (FANUC CNC system standard series, indicating that the product is a dedicated control component for FANUC CNC systems, ensuring compatibility with the host equipment).

• Base Model Code: Defines the basic structure, size and hardware parameters of the PCB board, ensuring that it matches the installation slot of FANUC CNC equipment and can be directly installed and used.

• Configuration Code: C084 (functional configuration and version specification code, defining the functional parameters, interface standards and version information of the PCB board, ensuring that it meets the functional requirements of the CNC system).

4. Technical Specifications

• Working Voltage: DC 24V (±10% fluctuation allowed), ensuring stable power supply and avoiding component damage caused by voltage instability.

• Operating Temperature: 0℃ - 50℃, suitable for the industrial workshop environment, able to maintain stable performance under normal working temperature conditions.

• Storage Temperature: -20℃ - 60℃, which can be stored stably in different temperature environments without component damage.

• Humidity Adaptability: 10% - 90% (non-condensing), able to adapt to the humidity environment of general industrial workshops, without affecting the use effect.

• Electromagnetic Compatibility: Industrial-grade anti-interference design, able to resist the electromagnetic interference in the workshop, ensuring the stable transmission of signals and the normal operation of the control function.

• Continuous Operation: Support 24-hour uninterrupted operation, no performance degradation, meeting the long-time production needs of industrial sites.

5. Product Features

1. High Compatibility: Strictly follows the standard of FANUC CNC systems, perfectly matches the interface of the host equipment, and can be directly replaced without modifying the host program, reducing the difficulty of maintenance and replacement.

2. Stable Performance: Adopts high-quality industrial electronic components, undergoes strict screening and aging testing, with low failure rate, and can maintain stable operation in complex industrial environments.

3. Comprehensive Protection: Built-in overcurrent, overvoltage and anti-static protection functions, effectively avoiding component damage caused by voltage fluctuation, static electricity and other factors, extending the service life of the product.

4. Easy Installation: Adopts plug-in design, which is consistent with the standard slot of FANUC CNC equipment, easy to install and disassemble, and convenient for on-site maintenance and replacement.

5. Reliable Quality: Complies with the industrial production standards of FANUC, undergoes strict quality inspection before leaving the factory, ensuring the reliability and stability of the product in long-term use.

6. Installation Instructions

1. Before installation, cut off the main power supply of the CNC equipment to ensure the safety of the operation process, and avoid electric shock or component damage caused by power on.

2. Wear anti-static gloves and an anti-static wristband to prevent static electricity from damaging the PCB board and its components.

3. Confirm that the part number of the PCB board matches the model of the host equipment, ensuring that the functional configuration and interface are compatible with the host system.

4. Align the PCB board with the standard slot of the host equipment, and insert it smoothly into the slot (do not force insertion to avoid damaging the pins or the board).

5. After inserting in place, tighten the fixing screws evenly, ensuring that the PCB board is firmly fixed and there is no loose phenomenon.

6. Connect the power line and signal line according to the interface marks on the PCB board, ensuring correct connection, no reverse connection or wrong connection.

7. After the installation is completed, check the connection status again, confirm that there is no loose wiring, and then turn on the power supply for test operation.

8. After the test is normal, the installation is completed, and the product can be put into formal use.

7. Operation Precautions

1. The product must be used in accordance with the rated working parameters, and it is strictly prohibited to use it beyond the specified voltage, temperature and humidity range, so as to avoid component damage and equipment failure.

2. Hot plugging is strictly prohibited — do not plug or unplug the PCB board when the equipment is powered on, otherwise it may cause damage to the board and the host equipment.

3. Keep the PCB board away from strong electromagnetic interference sources, avoid signal interference affecting the normal operation of the product, and ensure the stability of signal transmission and logic control.

4. Do not disassemble, modify or refit the PCB board without professional authorization, otherwise it may affect the functional performance of the product and even cause equipment failure.

5. If the system reports an error, signal abnormality or the product fails to work normally during use, cut off the power supply immediately, check the connection and the product itself, and contact professional personnel for maintenance if necessary.

8. Maintenance and Storage

8.1 Daily Maintenance

• Regularly clean the surface of the PCB board, use dry compressed air to blow off the dust on the surface, avoid dust accumulation affecting the performance of the product.

• Regularly check the connection of the power line and signal line, ensure that there is no loose or poor contact, and timely handle the abnormal situation.

• Observe the operating status of the PCB board during use, and deal with the abnormal temperature, signal interruption and other problems in a timely manner.

8.2 Storage Requirements

• Store the product in a dry, clean and well-ventilated environment, away from moisture, corrosion and strong electromagnetic interference.

• Do not place heavy objects on the product, avoid collision, extrusion and falling, so as to prevent the PCB board from being damaged.

• The unopened product has a shelf life of 12 months from the date of production; if it exceeds the shelf life, it needs to be inspected before use to ensure normal performance.

9. Quality Assurance

1. The product complies with the relevant standards of FANUC CNC systems and industrial electronic products, and has passed strict functional testing, aging testing and quality inspection before leaving the factory.

2. The product provides a 3-month warranty period from the date of purchase; within the warranty period, if there is any quality problem caused by non-man-made factors, it can be repaired or replaced free of charge.

3. For professional technical support, maintenance and after-sales service, please contact the designated after-sales department.

10. Important Reminder