Honeywell 51309153‑225 (MU‑TDOA27) Digital Output FTA (Solid State Relay Type Digital Output Terminal Board)
June 01, 2026

Honeywell 51309153‑225 (MU‑TDOA27) Digital Output FTA (Solid State Relay Type Digital Output Terminal Board)

Product Introduction 51309153‑225 (Model MU‑TDOA27) is a solid-state DO FTA for the Honeywell Experion PKS / TDC 3000 / TPS DCS system. It is specifically designed for high reliability, long lifespan, and medium-power switch loads, providing electrical isolation between the system and the field, and is suitable for continuous operation and high-frequency action scenarios.

Description

Product Introduction

51309153‑225 (Model MU-TDOA27) is a solid-state DO FTA for the Honeywell Experion PKS / TDC 3000 / TPS DCS system. It is specifically designed for high reliability, long lifespan, and medium-power switch loads, providing electrical isolation between the system and the field, and is suitable for continuous operation and high-frequency action scenarios. Model explanation

51309153‑225: Honeywell part number

MU-TDOA27: Module model

MU = Module Unit (FTA series)

TDOA = Total Digital Output Assembly (solid-state output)

27 = Hardware version and channel configuration variant Technical Specifications

Channel: 16 independent solid-state outputs

Load capacity:

AC: 120/240 VAC, 5 A (resistive)

DC: 24 VDC, 8 A (resistive)

Isolation: 1500 V RMS (between channels, between channels and bus)

Response time: ≤ 0.5 ms (solid-state without contacts)

Switching frequency: Maximum 100 Hz

Power supply: Backplane 24 VDC

Operating temperature: -20°C ~ +70°C

Hot-swappable: Supported

Fault detection: Open circuit / short circuit / overload (system diagnosis)

Interface and status

System side: High-density flat cable connects I/O modules

Field side: Large current detachable screw terminals

Indicators: ON/OFF for each channel, OK/FAULT for module

Configuration: DCS workstation software configuration Core function

High-power solid-state output: Compared to the 22/25 models in the same series, it has stronger load capacity and is suitable for larger power loads.

Contactless design: Long lifespan, no mechanical wear, fast operation, suitable for high-frequency actions.

Enhanced electrical isolation: 1500 V RMS isolation, resistant to on-site surges and noise interference.

Load control: Medium-sized motor starters, high-power solenoid valves, contactors, heaters, alarm lights.

Online replacement (hot-swappable): Maintenance without downtime.

System-level diagnosis: Precise detection of open circuits / short circuits / overloads. Applicable scenarios

Industry: Oil and gas, petrochemicals, power generation, metallurgy, water treatment, chemical industry

Applications: High-power valve switching, medium-sized motor control, heating circuits, high-frequency conditions, critical interlocks

Compatibility: Experion PKS (C200/C300), TDC 3000, TPS


Get a Quote