• Product Type: FANUC CNC System PCB Board (Printed Circuit Board)

• Part Number Compatibility: Suitable for FANUC CNC systems, matching all models of FANUC control systems

• Core Function: As the core control component of the CNC system, it is responsible for signal processing, data transmission and peripheral equipment connection, ensuring the stable operation of the CNC system

Technical Specifications

1. Working Voltage: DC 24V ±10% (stable power supply, avoiding voltage fluctuation impact)

2. Operating Temperature: 0℃ - 50℃ (suitable for industrial working environment)

3. Storage Temperature: -20℃ - 60℃ (can be stored for a long time without damage)

4. Installation Method: Plug-in installation (matches the standard card slot of FANUC CNC equipment)

5. Electromagnetic Compatibility: Industrial-grade anti-interference design, adapting to complex workshop environments

6. Working Mode: 24-hour continuous stable operation, no obvious heating or failure

Product Features

1. Industrial-grade quality: Adopts high-quality PCB substrate, corrosion-resistant and wear-resistant, suitable for long-term industrial use.

2. High compatibility: Perfectly matches FANUC CNC system, consistent with the installation size of original equipment, easy to replace and maintain.

3. Safety protection: Built-in over-current, over-voltage and anti-static protection circuits to avoid component damage.

4. Stable performance: Strictly screened components, low failure rate, ensuring long-term reliable operation in industrial scenes.

Installation Instructions

1. Before installation, cut off the power supply of the equipment to avoid electric shock or component damage.

2. Confirm that the part model matches the equipment (consistent with FANUC CNC system), and check that the installation slot is clean and free of obstacles.

3. Align the PCB board with the guide slot, insert it smoothly, and fasten it with screws (avoid over-tightening to prevent board deformation).

4. After installation, check the wiring connection to ensure that the power supply and signal lines are correctly connected.

Operation Precautions

1. Use the specified rated power supply, and do not input voltage exceeding the standard to avoid burning components.

2. Do not hot-plug the PCB board during operation; power off first when replacing or maintaining.

3. Avoid using in environments with heavy dust, strong corrosion or severe vibration to prevent board damage.

4. Do not disassemble, modify or cut the board without authorization; contact professional personnel for maintenance if there is a fault.

5. If abnormal phenomena such as signal interruption or equipment alarm occur, stop operation immediately and check the fault.

Maintenance and Storage

1. Daily Maintenance: Regularly clean the surface dust of the PCB board, check the tightness of the connector, and avoid loose wiring.

2. Storage Requirements: Store in a dry, ventilated and corrosion-free environment, avoid heavy pressure, collision and static electricity.

3. Shelf Life: 12 months under standard storage conditions (original packaging, no damage to components).

Quality Assurance

1. The product complies with industrial electronic standards and FANUC CNC system matching requirements.

2. All products have passed functional testing and aging testing before leaving the factory, ensuring stable performance.

3. This manual is applicable to all FANUC CNC system PCB boards, with strong universality and practicality.