Technical Specifications

1. Rated Working Voltage: DC 24V ±10%

2. Operating Ambient Temperature: 0℃ ~ +55℃

3. Storage Temperature Range: -20℃ ~ +70℃

4. Relative Humidity: 10%–90%, non-condensing

5. Installation Mode: Standard control cabinet card slot plug-in mounting

6. Electromagnetic Compatibility: Industrial EMC anti-interference standard

7. Continuous Operation: Support 24-hour long-term stable running

8. Insulation Performance: Comply with international industrial electronic safety standards

Main Features

1. Adopts high-quality industrial PCB material and original standard circuit design, stable performance and strong durability.

2. Optimized anti-electromagnetic interference circuit design, adaptable to complex industrial workshop environment.

3. Standard overall dimension and interface definition, fully compatible with matching FANUC CNC system.

4. Built-in over-current, over-voltage, surge and anti-static protection circuits to effectively protect onboard components.

5. Strict component screening, welding quality inspection and aging testing, low failure rate and long service life.

6. Simple plug-in installation, easy disassembly and replacement, convenient for daily equipment maintenance and after-sales repair.

Installation Instructions

1. Cut off the main power supply of CNC equipment completely before installation and maintenance, and confirm power-off state.

2. Take effective anti-static measures such as wearing anti-static wristband to avoid static damage to the PCB board.

3. Check the part number and model to confirm it is consistent with the equipment matching requirement.

4. Clean the inside of the control cabinet and mounting slot to remove dust, metal filings and foreign debris.

5. Align the PCB board with the cabinet guide slot, insert it slowly and smoothly into the fixed position.

6. Tighten the fixing screws evenly with appropriate force; over-tightening is prohibited to prevent PCB deformation.

7. Connect power lines and signal lines strictly in accordance with interface marking and wiring definition.

8. Recheck all assembly and wiring status, close the cabinet door, then perform power-on test run.

Operation Precautions

1. Only use the specified rated standard power supply; unstable, overvoltage or undervoltage input is prohibited.

2. Hot plugging and unplugging of the PCB board is strictly forbidden under powered-on condition.

3. Do not apply the product in environments with heavy dust, corrosive gas, water splash, oil mist and strong mechanical vibration.

4. Keep away from high-power inverters, frequency converters and other strong electromagnetic interference sources during operation.

5. Do not disassemble, cut or modify the circuit and onboard components without professional authorization.

6. Stop operation and cut off power immediately once system alarm, abnormal signal, startup failure or abnormal heat generation occurs.

Maintenance & Storage

1. Daily Maintenance: Regularly clean surface dust with dry compressed air; periodically check connector tightness and wiring aging status.

2. Storage Environment: Store in indoor dry, ventilated, dust-free space without corrosive gas.

3. Storage Conditions: Ambient temperature 5℃~35℃, relative humidity ≤85%, no condensation.

4. Handling Requirement: Avoid collision, bending, heavy pressure and static induction on the board.

5. Shelf Life: 12 months under original sealed packaging and standard storage conditions.

Quality Statement

1. This FANUC CNC System PCB Board complies with FANUC CNC industry manufacturing and testing standards.

2. All products pass strict functional test, aging inspection and quality verification before delivery.

3. This manual is applicable to original and compatible replacement FANUC CNC system PCB boards.