Product Introduction

Model Explanation

• 1SAP214200R0001: ABB standard part number.

• TU507-ETH:

  • TU = Terminal Unit

  • 507 = Ethernet interface base (screw‑terminal)

  • ETH = Ethernet communication

• 214200: S500 platform code for Ethernet screw‑terminal base units.

• R0001: Hardware revision (initial version).

• Feature: Passive base, works with S500 Ethernet modules (e.g., CI501‑PNIO, CI511‑ETHCAT), not standalone.

Technical Parameters

• Supply: 24 V DC

• Connection: Screw terminals (tool‑required)

• Communication ports: 2×RJ45 (Ethernet)

• Protection: IP20

• Operating temp.: 0 °C to +60 °C

• Storage temp.: -40 °C to +70 °C

• Humidity: 0–95% non‑condensing

• Weight: ~0.17 kg

• Dimensions: 67.5 mm W × 135 mm H × 28 mm D

• Mounting: Standard DIN rail

• Certifications: CE, UL, CSA, RoHS

• Compatibility: AC500 V2/V3, AC500‑eCo, AC500‑S; S500 Ethernet modules (CI501‑PNIO, CI502‑PNIO, CI511‑ETHCAT, CI521‑MODTCP, etc.)

Interface and Communication

• 2×RJ45 Ethernet ports: Support PROFINET, EtherCAT, Modbus TCP, EtherNet/IP.

• Screw terminals for field power and signal wiring.

• Backplane connector for S500 Ethernet modules; internal bus and 24 V DC power distribution.

• Connects to AC500 internal bus; plug‑and‑play, no config needed.

Core Functions

• Secure mounting and reliable screw‑connection for S500 Ethernet modules.

• Dual RJ45 ports: Enable daisy‑chain Ethernet networking.

• Screw terminals: High contact stability for high‑vibration environments.

• Supports hot swap of Ethernet modules to reduce downtime.

• Stable 24 V DC power and bus signal distribution; built‑in EMC protection.

Application Scenarios

• ABB AC500 PLC + S500 I/O systems requiring Ethernet communication.

• Factory automation: production lines, packaging machinery (PROFINET/EtherCAT).

• Process automation: water treatment, HVAC, energy management (Modbus TCP).

• Distributed I/O networks: remote sensor/actuator connection via Ethernet.

• Installations preferring screw‑type field wiring over spring‑cage.

Usage and Maintenance

• Mount on DIN rail; ensure ventilation, dryness, no direct sunlight.

• Connect 24 V DC with correct polarity.

• Insert S500 Ethernet module into TU507‑ETH and lock.

• Wire field cables to screw terminals: strip wire, insert, tighten screw.

• Connect Ethernet cables to RJ45 ports for network communication.

• Periodically check terminal tightness, RJ45 contacts, and dust; clean as needed.

• Use only compatible S500 Ethernet modules; avoid over‑tightening screws.

• Troubleshoot: check power, connections, and Ethernet link status first; replace base if damaged.