07: Procontic 07 series

CR: Controller with I/O (base unit)

41: Specification code, 40 series, 24VDC power, standard I/O configuration

Technical Specifications

CPU: 32‑bit processor, compliant with IEC 61131‑3

Memory: 480kB user program, 256kB user data

Power: 24VDC (19.2–30V), ≤15W power consumption

Digital I/O: 24 inputs / 16 outputs (relay/transistor selectable)

Analog I/O: 8 inputs (±10V/0–10V/0–20mA/4–20mA/Pt100); 4 outputs (±10V/0–20mA)

Communication: CS31 bus; RS‑232/RS‑485; Modbus RTU

Operating temperature: -20°C～+60°C

Protection: IP20

Mounting: DIN rail, single‑slot

Dimensions/Weight: 152×104×80mm; approx. 0.5kg

Interface & Indicators

Backplane: Gold‑finger connector for CS31 bus, power port

Front panel: Removable terminal block (digital/analog I/O, power, ground); LED status indicators (PWR/RUN/FAULT/COMM)

Configuration: DIL switches for station address; programs/parameters downloaded via host or programming software

Core Functions

Integrated CPU+I/O for independent logic control, process regulation, and data acquisition

CS31 bus master/slave, supporting remote I/O expansion (e.g., 07AI91, 07BR61R1)

Multi‑protocol communication for connection to third‑party instruments, drives, and host systems

Self‑diagnostics with LED status for fast fault localization

Hot‑swap capable for maintenance without system shutdown

Application Scenarios

Local control stations for ABB AC31/800xA/Advant OCS systems

Standalone control for small production lines, HVAC, water treatment, pump stations

Expansion, replacement, and maintenance of legacy ABB systems

Maintenance

Isolate power before wiring; separate high/low‑voltage cables

Periodically clean dust and tighten terminals

Keep environment dry/ventilated, away from VFDs/high‑power motors

Troubleshoot: power → communication → I/O modules → program configuration; do not open casing