Product Description

Model Number Interpretation

• 30: Rated power of 30 horsepower.

• V: VTAC7 series, HVAC-optimized AC drive.

• 4: 460 VAC input voltage class.

• 260: Firmware and hardware configuration code.

Technical Specifications

• Input: Three-phase 380–460 VAC (±10%), 50/60 Hz, 44 A.

• Rating: 30 HP (22.4 kW); continuous output current of 39 A.

• Output: Three-phase 0–460 VAC, 0–200 Hz, 39 A.

• Control: IGBT PWM with 2/4/8 kHz adjustable carrier frequency.

• Control Modes: V/Hz (default), SVC sensorless vector, FVC closed-loop vector (requires encoder).

• Feedback: ±10 V / 4–20 mA analog; encoder (for FVC).

• Enclosure: NEMA 12 (dust and dripping resistant).

• Cooling: Forced-air cooling fan.

• Dimensions (H×W×D): Approximately 597 × 356 × 356 mm.

• Weight: Approximately 25.4 kg (55 lbs).

• Certifications: UL 508, legacy CE.

• Overload Capacity: 110% continuous, 150% for 1 minute.

• Protection: Overcurrent, overvoltage, undervoltage, overtemperature, phase loss, ground fault, motor overload.

Interface and Communication Configuration

• Main Circuit Terminals: L1/L2/L3 (AC input), U/V/W (motor output), DC bus terminals.

• Control Terminals: 8 isolated digital inputs (start/stop, forward/reverse, reset, preset speeds), 4 digital outputs, ±10 V/4–20 mA analog I/O.

• Communication: RS232/485 serial ports; optional DeviceNet/ControlNet communication modules.

• Front Panel: Built-in keypad and LED display for speed, current, voltage, and fault code monitoring; supports manual/auto mode, jog operation, and parameter programming.

• Software: Compatible with CS3000 software for remote programming and monitoring.

Core Functions

• HVAC Optimization: Energy-efficient V/Hz control for fans and pumps, with reduced noise via adjustable carrier frequency.

• Vector Control: High torque at low speeds and precise speed regulation (FVC: ±0.01% with encoder).

• Flexible Regulation: Switchable between vector and standard V/Hz regulation to adapt to different load characteristics.

• Comprehensive Protection: Built-in protection mechanisms to ensure safe operation under abnormal conditions.

• Parameter Management: Password protection and parameter backup/restore functions for easy maintenance.

Application Scenarios

• HVAC Systems: Supply/exhaust fans, chilled water pumps, cooling towers.

• Light Industrial: Conveyors, mixers, packaging machinery.

• Legacy System Replacement: Direct replacement for outdated GV3000/SE series drives in 460 VAC, 30 HP motor automation lines.

Usage and Maintenance Instructions

• Installation: Mount in a well-ventilated cabinet with sufficient space for heat dissipation; avoid direct sunlight and corrosive environments.

• Wiring: Select appropriate cables for main and control circuits; tighten all terminals securely to prevent loose connections.

• Power-On Check: Verify input voltage and wiring integrity before powering on; set parameters according to the motor nameplate data.

• Regular Maintenance: Conduct quarterly maintenance to clean dust, inspect the cooling fan, terminals, and indicator lights.

• Safety Precaution: Disconnect all power sources and wait for internal capacitors to fully discharge before inspection and maintenance.