Product Description

Model Number Interpretation

• 1: First‑generation GP‑1200 series platform

• AC: AC variable‑speed drive

• 5: 200/230VAC voltage class

• 005: 5HP power rating

• C: Chassis (open‑frame) version, 200/230VAC dual input, global market

Technical Specifications

• Input: Three‑phase 200/230VAC ±10%, 50/60Hz; maximum input current 16.7A; input KVA 6.6kVA

• Output: Three‑phase 0–230VAC; maximum output current 14.2A; rated motor current 13.5A

• Power: 5HP (3.7kW) continuous

• Control: Open‑loop V/Hz; speed ratio 20:1; output frequency 0–400Hz; variable torque curves and torque boost

• Enclosure: Chassis (open‑frame), IP00 (indoor use only, requires additional enclosure)

• Protection: Overcurrent, overvoltage, undervoltage, overtemperature, short circuit, ground fault, motor stall, line transient protection

• Ambient: 0–45°C, 5%–95% RH (non‑condensing)

• Weight: Approximately 11.3kg (25lb)

Interface and Communication Configuration

• Power Terminals: L1/L2/L3 (three‑phase input), U/V/W (motor output), PE (protective earth)

• Control Terminals: Digital inputs for start/stop, forward/reverse, fault reset; analog input 0–10VDC for speed reference; relay output for fault indication (250VAC/5A)

• Communication: No onboard communication ports; hardwired control only

• Indicators: Two LEDs; green for power/run, red (IET) for drive fault

Core Functions

• Open‑loop V/Hz control with adjustable torque curves and torque boost for reliable starting and steady‑state operation

• Dual 200/230VAC input optimized for global and Asian power grids

• 0–10VDC analog speed input compatible with potentiometers and PLCs

• Comprehensive electrical and thermal protection safeguards drive and motor

• Direct drop‑in replacement for legacy 1AC series chassis drives, ensuring compatibility with existing wiring and control schemes

Application Scenarios

• Small‑to‑medium conveyors, fans, pumps, mixers, and processing machinery with 5HP motors in 200/230VAC regions

• Light manufacturing, commercial HVAC, and ventilation systems operating on 200/230VAC three‑phase power

• Retrofit and maintenance of older industrial and commercial AC drive installations with chassis‑style requirements

Usage and Maintenance Instructions

• Mount vertically in a clean, dry, well‑ventilated indoor area with adequate clearance for cooling airflow; install in a protective enclosure if exposed to dust or moisture

• Use rated copper conductors; separate power and control cables to minimize electromagnetic interference

• Inspect all connections before power‑up; check terminals and wiring periodically for looseness or corrosion

• Disconnect power before cleaning; use a dry cloth only—do not use liquids or chemical cleaners

• Routinely monitor heat sinks and terminals for signs of overheating

• Diagnose faults via onboard LED indicators; resolve all issues before restarting the drive

• Avoid static electricity discharge; do not disassemble the unit without professional guidance

• Store spare units in a cool, dry, dust‑free environment