8LSA45.DB022S300-3 Detailed Product Description
1. Product Overview

2. Basic Information

• Model: 8LSA45.DB022S300-3

• Series: 8LS3 (8LSA sub-series)

• Type: Three-phase synchronous servo motor, self-cooling (IC4A0A0)

• Size: 45 (100 mm flange)

• Encoder/Feedback: EnDat 2.2 inductive encoder (D0)

• Shaft End: Reinforced keyed shaft (S300-3)

• Connection: Straight circular connector

• Cooling: Self-cooling (free convection, no external fan)

• Mounting: Flange-mounted (100 mm square flange)

• Certifications: CE, UKCA, cULus, EAC, KC

• Insulation Class: F (155°C maximum winding temperature)

• Protection Class: IP64 (flange/shaft); IP20 (connector end)

3. Electrical Specifications

3.1 Performance Parameters

• Nominal Speed (nₙ): 2200 rpm

• Maximum Speed (nₘₐₓ): 6000 rpm

• Number of Pole Pairs: 5

• Nominal Torque (Mₙ): 9.5 Nm

• Stall Torque (M₀): 11 Nm

• Maximum Torque (Mₘₐₓ): 38 Nm

• Nominal Power (Pₙ): 2.2 kW

• Nominal Current (Iₙ): 4.2 A (rms)

• Stall Current (I₀): 4.8 A (rms)

• Maximum Current (Iₘₐₓ): 18.5 A (rms)

• Torque Constant (Kₜ): 2.26 Nm/A

• Voltage Constant (Kₑ): 185 V/krpm

• Phase Resistance (R): 1.2 Ω (per phase)

• Phase Inductance (L): 3.8 mH (per phase)

• Thermal Time Constant (tₜₕₑᵣₘ): 22 min

3.2 Feedback System

• Type: EnDat 2.2 inductive encoder (brushless, contactless, digital)

• Resolution: 23 bits (8,388,608 counts/rev) + 12 bits multi-turn

• Communication: Serial digital interface (EnDat 2.2)

• Supply Voltage: 5 VDC ±5%

• Interface: Direct compatibility with B&R ACOPOS/ACOPOSmulti drives

• Features: High noise immunity, high resolution, functional safety capability

3.3 Holding Brake (Not Fitted)

• Brake Type: Spring-applied, electrically released (optional)

• Voltage: 24 VDC ±10%

• Power Consumption: 8 W

• Holding Torque: 10 Nm

• Note: This model (S300-3) has no holding brake

4. Mechanical Specifications

• Flange Size: 100 mm × 100 mm (square flange, centering diameter 100 mm j6)

• Shaft Diameter: 19 mm (reinforced keyed shaft, keyway 6 mm × 6 mm)

• Shaft Length: 40 mm

• Dimensions (W × H × L): 100 mm × 100 mm × 145 mm

• Weight: Approx. 4.8 kg

• Moment of Inertia (J): 2.1 kg·cm²

• Bearing Type: Reinforced precision ball bearings (high radial/axial load capacity)

• Shaft Runout: ≤0.02 mm

• Vibration Grade: A (≤1.12 mm/s rms)

• Noise Level: ≤65 dB(A) at 2200 rpm

• Oil Seal: DIN 3760 Form A (standard, for shaft protection)

5. Environmental Conditions

5.1 Temperature

• Operating: 0–40°C (rated); up to 55°C (with 15% torque derating)

• Storage: −25–55°C

• Transport: −25–70°C

5.2 Humidity

• Operating: 5%–85% RH (non-condensing)

• Storage: 5%–95% RH (non-condensing)

5.3 Mounting & Altitude

• Orientation: Any (horizontal/vertical; no derating)

• Rated Altitude: 0–1000 m

• Max Altitude: 4000 m (with 10% torque derating above 1000 m)

6. Interface & Connection

• Motor Connector: HTEC circular connector (size 2), straight type

• Cable Compatibility: B&R hybrid power/feedback cables (e.g., 8CC006.12-1)

• Wire Gauge: 1.0–2.5 mm² (power); 0.25–0.5 mm² (feedback)

• Cable Length: Max 50 m (without signal amplification)

• Connector Hood: Optional IP65 protection for connector end

7. Thermal Protection

• Method: Winding temperature sensor (PTC 100 Ω) + drive-based monitoring

• Threshold: 110°C (drive limits torque); 155°C (hardware shutdown)

• Cooling Requirement: Natural convection (no external fan needed; ensure adequate airflow around the motor)

8. Key Features

• High Torque Density: 9.5 Nm nominal torque, 38 Nm peak torque for heavy-load applications

• High-Resolution Digital Feedback: EnDat 2.2 encoder (23 bits) for ultra-precision positioning

• Reinforced Mechanical Design: 100 mm flange, reinforced bearings, and keyed shaft for high radial/axial loads

• Robust & Durable: IP64 protection, brushless design, and long service life

• High Efficiency: IE3 classification, low energy consumption, and reduced heat generation

• Straight Connector: Simplifies cable routing in confined spaces

• Easy Maintenance: Brushless design with minimal upkeep and long service intervals

9. Accessories

9.1 Mandatory

• Power/Feedback Cable: 8CC006.12-1 (standard length)

• Mounting Bolts: M6 × 12 mm (4 pcs)

9.2 Optional

• Holding Brake Kit: 8LSA45.B000-3 (retrofit)

• Smooth Shaft Kit: 8LSA45.K000-3 (retrofit)

• Connector Hood: IP65 protection for connector end

• Gearbox: B&R 8G series planetary gearboxes (ratio 3:1 to 50:1)

10. Typical Applications

• CNC machine tools (milling, turning, grinding)

• Heavy-duty automated assembly lines

• Packaging machinery (filling, sealing, labeling)

• Robotics (large articulated arms, SCARA robots)

• Material handling systems (conveyors, pick-and-place)

• Printing machinery (digital, offset, flexographic)

• Textile machinery (spinning, weaving, knitting)

• Medical and laboratory automation equipment