Technical Specifications

• Part Number: 51304518‑150 (51304518150)

• Alternative ID: APM Control Module, CC (Conformal Coated), R400

• Module Type: Advanced Process Manager (APM)

• System Compatibility: Honeywell TDC3000 / TPS (UCN network)

• Processor: 32‑bit RISC, 16 MHz

• Memory: 4 MB RAM, 2 MB Flash

• Control Functions: Regulatory PID, cascade, ratio, feedforward; sequential logic; batch recipes

• I/O Capacity: Up to 1,000 process points (via IOPs)

• Network: UCN (1 Mbps, redundant A/B)

• Power: 24 VDC ±10%, 600 mA (backplane)

• Power Consumption: ~14.4 W

• Operating Temperature: 0°C to +60°C

• Storage Temperature: -40°C to +85°C

• Humidity: 5%–95% RH, non‑condensing

• Dimensions (H×W×D): 220 × 120 × 35 mm

• Weight: ~0.49 kg

• Coating: Conformal Coated (CC) – protects against dust, moisture, corrosion

• Certifications: CE, RoHS compliant

• Revisions: Common Rev F (hardware); Rev C (firmware)

• Status: Discontinued (legacy replacement only)

Interface & Communication Configuration

• Host Interface: UCN network (75Ω coaxial, redundant A/B)

• I/O Interface: Backplane connection to IOPs (analog/digital I/O cards)

• Redundancy: UCN A/B redundancy supported; module can be configured for redundant operation

• Diagnostics: On‑board LEDs for power, UCN link, and module status; remote fault reporting

• Hot Swap: Yes (replace without system shutdown)

• FTA Compatibility: N/A (direct backplane I/O connection)

Core Functions

1. Advanced Regulatory Control: PID, cascade, ratio, feedforward, dead‑time compensation loops.

2. Sequential & Logic Control: Interlocks, permissives, state‑based sequential logic.

3. Batch Processing: Recipe management, phase control, parameterization for batch manufacturing.

4. Process Optimization: Adaptive tuning, model predictive control (MPC) support.

5. Data Acquisition & Logging: Process data collection, trending, reporting, analysis.

6. Alarm Management: Configurable alarm setpoints, prioritization, and actions.

Application Scenarios

• TDC3000/TPS DCS: Core advanced control module for process automation.

• Harsh Industrial Environments: Chemical, petrochemical, oil & gas, offshore platforms, pulp & paper, wastewater treatment (high humidity/dust/corrosion).

• Complex Processes: Continuous, batch, and hybrid processes requiring tight control.

• Legacy System Upgrades: Drop‑in replacement for 51304518‑100 (standard coating) in harsh locations.

Compatibility Note

• System Compatibility: Honeywell TDC3000/TPS (UCN network required)

• Replacement: Direct upgrade for 51304518‑100 (standard coating); same functionality with conformal coating

• Firmware: Requires TDC3000 firmware Rev 400+ for full APM functionality

• Key Difference: 51304518‑150 = Conformal Coating (CC); 51304518‑100 = Standard (non‑coated)