Technical Specifications

• Part Number: 51304443-100 (51304443100)

• Module Type: MU-TDOR12 (Relay Output FTA)

• Channel Configuration: 16 × independent electromechanical relay outputs (dry contact)

• Load Voltage Rating: 120 VAC / 125 VDC (max)

• Contact Rating: 6 A per channel (resistive load), 1/3 HP at 120 VAC

• Isolation: 1500 VAC rms (channel‑to‑backplane)

• Response Time: ≤10 ms per channel

• Power Supply: 24 VDC ±10%, 0.3 A (backplane‑powered)

• Operating Temperature: -20°C to +60°C (standard environment)

• Storage Temperature: -40°C to +85°C

• Humidity: 5%–95% RH, non‑condensing

• Dimensions (H×W×D): 270 × 185 × 95 mm (Size C, 18‑inch form factor)

• Weight: ~2.3 kg

• Certifications: UL‑listed (no CE/RoHS)

• Coating: Basic conformal coating (standard protection)

• Terminals: Compression‑type (12–22 AWG, non‑vibration‑resistant)

• Status Indicators: Power/Fault LED, individual channel status LEDs

• Current Draw: ≤3.6 W

• Vibration Resistance: 2g, 10–500 Hz (standard industrial tolerance)

Interface & Communication Configuration

• DCS Interface: UCN backplane edge connector (1 Mbps, TDC3000/TPS/Experion PKS compatible)

• Field Interface: Compression‑type terminals (16 channels for 120 VAC/125 VDC loads)

• Redundancy: Supports redundant IOP (Input/Output Processor) configurations

• Diagnostics: On‑board self‑diagnostics with fault reporting via UCN; LED status for quick troubleshooting

• Wiring: Accepts 12–22 AWG stranded copper wire

• Connector: UCN 96‑pin edge connector (gold‑plated contacts)

Core Functions

1. 16‑Channel Relay Output Switching: Controls high‑power field devices (motor starters, solenoids, alarms, actuators) via dry‑contact relays.

2. High‑Voltage Isolation: 1500 VAC isolation protects DCS from load‑side electrical noise and voltage spikes.

3. Standard Environment Protection: Basic conformal coating safeguards against dust and moisture in non‑harsh areas.

4. UL Compliance: Meets UL safety standards for industrial deployments.

5. Backplane‑Powered: Draws power from UCN backplane, eliminating external power supplies.

6. Status Monitoring: Individual channel LEDs enable quick visual status checks.

Application Scenarios

• Process Industries: Standard chemical, petrochemical, power generation, pulp & paper facilities (non‑harsh environments).

• High‑Power Device Control: 120 VAC/125 VDC motor starters, solenoid valves, alarm beacons, and heavy‑duty actuators.

• Legacy DCS Systems: Replacement/expansion for Honeywell TDC3000/TPS installations in standard plant areas.

• Non‑Corrosive Zones: Indoor control rooms, dry manufacturing floors, and low‑humidity facilities.

• Cost‑Sensitive Projects: Applications requiring basic relay output functionality without CE/RoHS or extreme environment features.

Compatibility Note

• Form‑factor compatible with other 51304443 series (Size C, UCN connector).

• Functionally compatible with 51309148 series (16‑channel relay output, UCN protocol).

• Recommended for legacy TDC3000/TPS systems needing 120 VAC/125 VDC relay outputs in standard non‑harsh environments.