Honeywell 51304427-100 (MU-TDOR22)
May 27, 2026

Honeywell 51304427-100 (MU-TDOR22)

Product Introduction Model: 51304427-100 (Alias: 51304427100, MU-TDOR22) Type: Digital Output FTA (Field Termination Assembly) Relay Module Manufacturer: Honeywell Series: TDC3000 / TPS DCS (UCN), MU Series I/O Description: The 51304427-100 (MU-TDOR22) is a 16‑channel digital output relay FTA for Honeywell TDC3000/TPS systems. It provides field‑side termination and relay switching for DCS digital output signals, acting as the interface between DCS IOP cards and high‑power field loads.

Description

Technical Specifications

  • Part Number: 51304427-100 (51304427100)

  • Module Type: MU-TDOR22 (Digital Output Relay FTA)

  • Channel Configuration: 16 × SPDT relay outputs

  • Contact Rating: 240 VAC / 125 VDC, 5 A resistive per channel

  • Isolation: 1500 VAC rms channel‑to‑backplane isolation

  • Input Logic: 24 VDC from UCN controller (HPM/APM)

  • Power Supply: 24 VDC ±10%, 1.0 A (backplane‑powered)

  • Fuse: 6 A SB (system board fuse)

  • Operating Temperature: -20°C to +60°C

  • Storage Temperature: -40°C to +85°C

  • Humidity: 5%–95% RH, non‑condensing

  • Dimensions (H×W×D): 307 × 120 × 50 mm (12‑inch size B)

  • Weight: ~2.0 kg

  • Certifications: Non‑CE, non‑conformally coated

  • Status Indicators: 16 channel LEDs + Power/Fault LEDs

Interface & Communication Configuration

  • DCS Interface: UCN backplane via edge connector (1 Mbps)

  • Field Interface: Compression‑type screw terminals (16 channels, common + NC + NO)

  • Redundancy: Does not support redundant controller inputs

  • Diagnostics: On‑board self‑diagnostics with fault reporting to DCS

Core Functions

  1. Relay Output Switching: 16 independent SPDT relays for direct field load control.

  2. Field Termination: Centralizes wiring for digital output signals from DCS IOPs.

  3. Electrical Isolation: Protects DCS from field‑side voltage spikes, noise, and ground loops.

  4. Status Monitoring: Per‑channel LEDs for quick visual verification of output state.

  5. Rack Integration: Standard TDC3000 rack‑mount design for easy installation.

Application Scenarios

  • Process Industries: Chemical, petrochemical, oil & gas, power generation, pulp & paper.

  • Field Device Control: On/off control of valves, pumps, fans, motors, and solenoids (up to 5 A).

  • Alarm Systems: Driving audible/visual alarms for process events.

  • Interlock Circuits: Non‑safety interlocks (non‑SIL rated) for process control.

Key Difference vs. 51304423-100 (MU-TDOD12)

  • 51304427-100 (MU-TDOR22): 16‑channel FTA relay module (field termination focus, non‑redundant, non‑CE).

  • 51304423-100 (MU-TDOD12): 12‑channel relay output module (higher density, redundant‑capable, CE/UL certified).


Get a Quote