Technical Specifications

• Part Number: 51304386-100 (51304386100)

• Alternate Model: MU-PPIX02

• Channel Count: 8 isolated pulse input channels

• Input Signal Type: Rectangular/sine wave pulses (self-powered 2-wire, 3-wire voltage/contact input)

• Frequency Range: 0 Hz to 10 kHz (0.01 Hz resolution)

• Pulse Width: 10 µs to 100 ms

• Input Scan Rate: 32 samples per second

• Accuracy: ±0.1% of full scale

• Isolation: Channel-to-channel isolation; ground loop protection

• Power Supply: 24VDC ±10% (backplane-powered)

• Power Consumption: Max 3.5 W

• Operating Temperature: -40°C to +85°C

• Storage Temperature: -55°C to +85°C

• Humidity: 5%–95% RH, non-condensing

• Dimensions (H×W×D): 308 × 120 × 35 mm

• Weight: 0.69 kg

• Certifications: CE (non-conformally coated)

Interface & Communication Configuration

• Field Interface: Compatible with FTA (Field Terminal Assembly) models MU-TPIX12, MU-TPIX52, MC-TPIX12, MC-TPIX52

• System Interface: UCN backplane connector (1 Mbps UCN communication)

• Diagnostics: On-board LEDs for power, run, fault status; real-time pulse signal quality monitoring

• Redundancy: Not supported (single-module operation)

Core Functions

1. 8-Channel Pulse Acquisition: Captures pulse/frequency signals from flow meters, tachometers, encoders, and counters.

2. High-Precision Measurement: 0.01 Hz resolution and ±0.1% accuracy for reliable process data.

3. Multi-Signal Compatibility: Handles rectangular/sine wave pulses and contact closures from diverse field devices.

4. Electrical Isolation: Isolated inputs suppress noise and ground loops in harsh industrial environments.

5. Real-Time Data Processing: Converts pulse data to engineering units (e.g., flow rate, RPM) for DCS control.

Application Scenarios

• Process Industries: Chemical, petrochemical, oil & gas, power generation, pulp & paper, water treatment.

• Flow Measurement: Integrates with turbine, vortex, and positive displacement flow meters for accurate flow monitoring.

• Speed Monitoring: Connects to tachometers/encoders for rotational speed monitoring of pumps, compressors, and turbines.

• Production Counting: Tracks pulse-based production counts in manufacturing lines.