Technical Specifications

• Part Number: 51304362-100

• Channel Count: 32 isolated low‑level analog inputs

• Input Signal Ranges:

  • Voltage: ±10mV, ±50mV, ±100mV, 0–5V

  • Current: 4–20mA (via external shunt)

• Accuracy: ±0.05%–±0.1% of full scale (25°C)

• Resolution: 16‑bit ADC

• Scan Rate: 100ms per channel (configurable)

• Switching Time: <5ms channel switching

• Power Supply: 24VDC ±10%, 6–10W typical

• Operating Temperature: -40°C to +70°C

• Storage Temperature: -55°C to +85°C

• Humidity: 5%–95% RH, non‑condensing

• Dimensions (H×W×D): 308 × 120 × 35 mm

• Weight: 0.65 kg (1.43 lbs)

• Certifications: CE, UL, RoHS, SIL2/SIL3 capable (per application)

Interface & Communication Configuration

• Field Interface: Screw‑terminal FTA (Field Terminal Assembly) for direct sensor wiring

• System Interface: Dedicated backplane connector for I/O Link / FSC bus

• Communication Protocol: Honeywell proprietary I/O Link (supports redundancy)

• Isolation: Channel‑to‑channel 250Vrms; field‑to‑system 500Vrms

• Diagnostics: On‑board LEDs for power, run, fault, and communication status; real‑time fault reporting via system bus

Core Functions

1. 32‑Channel Low‑Level Signal Multiplexing: Efficiently scans and conditions weak analog signals (mV range) from thermocouples, RTDs, and low‑level transmitters.

2. High‑Accuracy Signal Conditioning: Precision amplification, filtering, and linearization to preserve signal integrity in noisy industrial environments.

3. Redundancy Support: Compatible with redundant system configurations for high‑availability and safety‑critical loops.

4. Fault Detection & Reporting: Monitors for open/short circuits, overrange, and module health; reports diagnostics to the host controller.

5. Hot‑Swappable: Online replacement in redundant systems without process shutdown.

Application Scenarios

• Process Industries: Chemical, petrochemical, oil & gas, power generation, pulp & paper, and pharmaceuticals.

• Low‑Level Signal Monitoring: Thermocouple/RTD temperature, strain gauge, and low‑pressure sensor inputs.

• Safety Instrumented Systems (SIS): FSC and Safety Manager platforms for SIL2/SIL3 safety loops.

• Honeywell DCS: Native integration with TDC3000, Experion PKS, and legacy process control systems.