0-57430-1G
Description
1. Model Definition
0-57430: Base model of 6010 CPU module for AutoMax multi-processor racks
-1: Core hardware revision 1
G: Equipped with full conformal coating for enhanced environmental protection
2. Basic Specifications
CPU: 8 MHz, 16-bit architecture
Memory: 256K words (16-bit) parity RAM with battery backup
Backup Battery: 3.6 V lithium AA battery, minimum 42 days data retention, typical 333 days
Power Supply: 5 V DC ±5% from backplane, typical current 1.5 A
Operating Temperature: 0 °C to +55 °C
Storage Temperature: −40 °C to +85 °C
Dimensions (W×H×D): 32 × 298 × 187 mm
Weight: Approximately 0.80 kg
Conformal Coating: Yes
Related Manual: J-3650, supplementary document J-3729
3. Interfaces & Communication
Backplane: AutoMax DCS 5000 system bus, installed in slot 1 to 8
Front Port: DB9 RS-232 serial port for programming and online monitoring
Status LEDs: Power, Ready, Run, Fault, Battery Low
Edge Connector: 96-pin DIN 41612 backplane interface
4. Key Functions
Executes AutoMax control logic, motion programs and I/O processing tasks
Cooperates with common memory modules to realize data sharing among multiple processors
Supports high-speed real-time control for industrial drives and production lines
Retains program and data in RAM via battery backup during power loss
Revision 1G features full conformal coating to resist moisture, dust and corrosive substances; firmware and diagnostic functions remain the same as Revision 1
5. Applications
Multi-processor control systems of AutoMax DCS 5000 for rolling mills, paper machines and metal processing equipment
Industrial sites with high humidity, heavy dust or corrosive atmosphere
Replacement and retrofit for legacy AutoMax devices
Direct substitute for 0-57430-1 and 0-57430-1H
6. Revision Cross-Reference
-1: Revision 1, no conformal coating, standard temperature range
-1G: Revision 1G, full conformal coating, standard temperature range
-1H: Revision 1H, full conformal coating and extended temperature range
Get a Quote