May 27, 2026

B&R 3AM050.6 SYSTEM 2005 Analog Mixed Module

The 3AM050.6 is a compact mixed analog module belonging to B&R SYSTEM 2005 series. It integrates four analog input channels and four analog output channels on a single unit to realize signal collection and control output simultaneously. Equipped with 12-bit high resolution and galvanic isolation design, it supports 0–10 V differential input and ±10 V output. This module features outstanding anti-interference performance, compact structure and reliable operation, which is ideal for space-limited industrial sites that require both analog monitoring and analog control.

Description

B&R 3AM050.6 SYSTEM 2005 Analog Mixed Module

Product Introduction

The 3AM050.6 is a compact high-performance analog mixed module from B&R’s SYSTEM 2005 series, integrating 4 analog inputs and 4 analog outputs in a single slot. Designed for space-saving and cost-effective analog signal processing, it accepts 0–10 V differential inputs and provides ±10 V outputs, each with 12-bit resolution. Featuring galvanic isolation between field side and PLC backplane, it ensures stable and reliable signal conversion for process monitoring and closed-loop control in industrial environments.

Basic Information

Model: 3AM050.6
Brand: B&R (Bernecker + Rainer, ABB Group)
Series: SYSTEM 2005
Type: 4-Input / 4-Output Analog Mixed Module
Input Range: 0–10 VDC, differential
Output Range: ±10 VDC
Resolution: 12-bit (inputs and outputs)
Power Supply: 24 VDC (field), 5 VDC (backplane)
Power Consumption: 5.0 W @ 24 VDC, 1.5 W @ 5 VDC; Total 6.5 W
Protection Class: IP20
Operating Temperature: 0°C to +60°C
Storage Temperature: -25°C to +70°C
Relative Humidity: 5% to 95%, non-condensing
Isolation: 2,500 VAC (channel-to-PLC); no channel-to-channel isolation
Certifications: CE, cULus, EAC, UKCA
Mounting: Single-width slot in SYSTEM 2005 racks
Terminal Block: TB170 (ordered separately)

Function and Positioning

The 3AM050.6 acts as a compact all-in-one analog signal interface for SYSTEM 2005 controllers, combining precise signal acquisition and control output in one module. It converts 0–10 V differential signals from sensors (pressure, flow, temperature, level) into digital values for the PLC, while converting digital control commands into ±10 V analog signals for actuators, valves, and variable-frequency drives. Galvanic isolation protects the control system from electrical noise and voltage spikes. Its mixed I/O design optimizes system architecture for applications requiring both monitoring and control, serving as a critical bridge between analog field devices and digital control systems.

Core Performance Parameters

Channels: 4 differential analog inputs, 4 analog outputs
Input Signal: 0–10 VDC, differential
Output Signal: ±10 VDC
Resolution: 12-bit (4096 steps)
Conversion Time: <1 ms for all channels; <1.5 ms with averaging enabled
Basic Accuracy: ±0.1% of full scale at 25°C (inputs); max ±0.3% (outputs)
Temperature Coefficient: ±50 ppm/°C
Input Impedance: 2 MΩ
Isolation Voltage: 2,500 VAC (channel-to-backplane)
Status Indicators: LEDs for converter function and software timing start pulse
Diagnostics: Module health via software; converter status via LED
Operating Modes: Cyclic measurement with optional averaging, direct software timing, software timing with 2–65.535 ms
EMC Compliance: EN 61000-6-2, EN 61000-6-4
Configuration: Via B&R Automation Studio V4.x and above
Output Protection: Short-circuit proof

General Compatible Accessories

B&R SYSTEM 2005 series backplanes and 6/9/12/15-slot racks
B&R SYSTEM 2005 series CPU (CP260) and interface modules (IF260/IF060)
24 VDC industrial power supplies (0PS105.1, 0PS205.1)
Shielded analog signal cables (0G0002.00-090)
Terminal block TB170 (required for field wiring, sold separately)
B&R Automation Studio V4.x and above for programming and diagnosis
Application memory modules (2ME903.90-1) for program storage

Applicable Equipment Fields

Factory Automation: Automotive assembly lines, packaging machinery, machine tools, robotics
Process Control: Food and beverage, pharmaceutical, chemical, water treatment, pulp and paper
Energy Management: Power monitoring, renewable energy systems, energy efficiency control
Building Automation: HVAC systems, environmental monitoring, facility management
Motion Control: Analog feedback for servo systems, frequency converters, positioning drives
Harsh Environments: Manufacturing workshops, high-vibration sites, electrical noise-intensive areas
General Automation: Any SYSTEM 2005 application requiring integrated 0–10 V input and ±10 V output analog processing

Contact Info