System architecture

The system adopts a multi-board slot-based backplane structure, with each core board performing specific tasks.

The GSR01 system motherboard carries all the slots and bus power supply.

The GMM series motion control board executes interpolation and trajectory calculations.

The GMR/GRT series graphics display driver board outputs the human-machine interface.

The GRS01 I/O communication substrate receives and transmits peripheral signals.

The GSC series PLC logic board controls the sequence of machine tool operations.

The GSP series panel control board handles key operations and status feedback.

The GSY01 servo axis control communication board links the servo units.

Basic performance parameters:

Number of controlled axes: 2000G - maximum 4 axes, 3000G - maximum 8 axes

Minimum command unit: 0.001mm

Maximum rapid feed rate: 48m/min

Spindle control: Analog / serial bus speed regulation, supports gearshift

Program storage: Standard 64KB, expandable to 128KB

Communication methods: RS232 serial port, internal high-speed bus

Operating environment:

Operating temperature: 0℃~55℃

Storage temperature: -25℃~85℃

Applicable humidity: 90% without condensation

Standard board slot arrangement:

Slot1: GMM main control board

Slot2: GMR/GRT display board

Slot3: GRS/GSY interface board

Slot4: GSC logic board

Slot5: GSP panel board Common functions

G-code standard processing, fixed cycle, subroutine calling

M/S/T auxiliary functions, automatic tool change in tool magazine

Limit protection, emergency stop interlock, fault self-diagnosis

Program upload/download, machine parameter setting