1. Overview

2. Specifications

• Model: JANCD-FC110 (FC110)

• Manufacturer: Yaskawa Electric

• Revision: B01 (common), A01 (older)

• Part Number: DF9200740-B01

• System Compatibility: YASNAC I80, I80M

• Board Type: Slave I/O Interface PCB

• I/O Points: 64 Inputs / 32 Outputs (DC24V, opto-isolated)

• Input Type: NPN/PNP compatible, 24VDC sink/source

• Output Type: Transistor (0.3A/point max), opto-isolated

• Power: 24VDC ±10%, ~200mA

• Operating Temp: 0°C to +55°C

• Dimensions: 267 mm × 152 mm (10.5" × 6")

• Weight: ~0.4 kg

• Form Factor: I80 standard slot (backplane: JANCD-FC006)

• Shipping Weight: ~0.9 kg (2 lbs)

3. Key Functions

• I/O Expansion: Adds 64IN / 32OUT to the I80 CNC system.

• Signal Conditioning: Opto-isolation for noise immunity and CNC protection.

• High-Speed I/O: 1ms refresh cycle for real-time machine control.

• Slave Communication: High-speed link to main I/O board (JANCD-1021) via backplane.

• LED Status Indication: On-board LEDs for power, communication, and I/O status.

• Wiring Interface: Screw-terminal connectors for field wiring.

4. Compatibility

• Backplane: JANCD-FC006 (I80 main base)

• CNC Controllers: YASNAC I80, I80M

• Main I/O Board: JANCD-1021 (required for operation)

• Related Boards:

  • JANCD-FC100B/C: HIF Communication Board

  • JANCD-FC008: Axis Control Board

  • JANCD-FC050: Local I/O Board

5. Rev B01 Improvements

• Enhanced Isolation: Higher surge immunity for harsh environments.

• Lower Power Consumption: Reduced current draw (~200mA).

• Improved Connector Reliability: Gold-plated contacts for long-term stability.

• Updated Firmware: Better error handling and auto-recovery.

6. Notes

• EOL Status: Discontinued by Yaskawa; only used/refurbished/new surplus available.

• Configuration: Requires setup in I80 CNC parameters to enable I/O mapping.

• Wiring: Input COM = 24V+, Output COM = 24V– (avoid reverse polarity).