1. General Information

• Model: A06B-6200-H008

• Type: αiPS-15i (PSM-15i), power supply module for αi servo/spindle amplifiers

• Manufacturer: FANUC

• Series: Alpha i (A06B-6200 series)

• Application: CNC machines, machining centers, lathes; supplies DC bus to αi servo (SVM) and

2. Electrical Specifications

• Input: 3‑phase AC 200–240V, 50/60Hz

• Rated Input Current: 33A @ 200V

• Rated Power: 9.4 kW

• DC Output Voltage: 283–339 VDC (rectified bus)

• Regeneration: Built‑in regenerative circuit (energy recovery)

• Cooling: Forced air (internal fan + heatsink)

3. Environmental & Mechanical

• Operating Temp: 0°C to +55°C

• Storage Temp: -20°C to +70°C

• Humidity: 5%–95% RH, non‑condensing

• Protection: IP20

• Mounting: Vertical cabinet mount

• Dimensions (H×W×D): 380 × 60 × 272 mm

• Weight: Approx. 4 kg

• Standards: EN50178, UL508C

4. Key Features

• 9.4 kW high‑efficiency power supply for medium‑to‑high power CNC systems

• 60 mm slim width (saves cabinet space)

• Integrated regeneration: no external resistor needed for most applications

• Leakage detection: monitors motor/power line insulation degradation

• LED status: power, alarm, ready

• Full protection: overvoltage, undervoltage, overcurrent, overheat, fan failure

5. Compatibility

• CNC Systems: FANUC 0i‑B/D, 30i‑B, 16i/18i/21i

• Servo Amplifiers: αiSVM series (A06B-6114/6117‑Hxxx)

• Spindle Amplifiers: αiSPM series (A06B-6141‑Hxxx)

• Motor Series: αi‑M / αi‑S (servo), αi‑B (spindle)

6. Common Alarms

• AL400: Overvoltage

• AL401: Undervoltage

• AL402: Overcurrent

• AL403: Overheat

• AL404: Fan failure

• AL405: Regeneration error

7. Maintenance & Safety

• Maintenance: Clean air filters monthly; inspect fan quarterly; check terminals/cables quarterly.

• Safety: High DC bus voltage remains after power‑off; only qualified technicians to service; ensure proper grounding.