1. GENERAL INFORMATION

• Part Number: A99L-0035-0001

• Manufacturer: FANUC LTD, Japan

• Type: Robot cable clamp (mechanical accessory)

• Description: Heavy‑duty clamp for securing robot power/signal cables

• Weight: Approx. 113 g (4 oz)

• Application: FANUC R‑series / M‑series robots (cable management)

2. SPECIFICATIONS

2.1 Mechanical

• Material: High‑strength engineering plastic + steel hardware

• Clamp Range: Ø10–Ø25 mm cables

• Mounting Holes: 2×M4 screw holes (32 mm spacing)

• Tightening Torque: 1.2–1.5 N·m (M4 screws)

• Breaking Strength: ≥ 500 N (cable pull‑out resistance)

• Operating Temp: −20°C to +60°C

• Humidity: 20%–85% RH, non‑condensing

• Protection Class: IP40 (dust resistant)

3. COMPATIBILITY

• Robot Models:

  • FANUC R‑2000i series (all payloads)

  • FANUC M‑10i / M‑20i / M‑710i series

  • FANUC LR Mate series

• Cable Types:

  • Servo power cables (Ø12–Ø20 mm)

  • Encoder signal cables (Ø10–Ø16 mm)

  • Robot arm harness cables (Ø15–Ø25 mm)

4. FEATURES

• Robust grip: Prevents cable slippage during robot motion

• Durable construction: Resists oil, coolant, and industrial chemicals

• Easy installation: Tool‑mountable design for quick replacement

• Strain relief: Reduces cable bending stress at connection points

• OEM fit: Exact replacement for original FANUC clamps

5. INSTALLATION INSTRUCTIONS

1. Power OFF: Disable robot power and release brakes.

2. Position Clamp: Place clamp around cable at desired mounting point.

3. Align Holes: Match clamp holes to robot mounting bracket.

4. Insert Screws: Use 2×M4 screws (supplied).

5. Tighten: Torque screws to 1.2–1.5 N·m (cross pattern).

6. Verify: Check cable is secure; no pinch points or sharp bends.

7. Test: Jog robot through full range; confirm no cable movement.

6. MAINTENANCE & TROUBLESHOOTING

• Maintenance:

  • Inspect monthly: Check for cracks, wear, or loose screws.

  • Clean quarterly: Remove dust/coolant buildup.

  • Replace annually: Or if damaged (cracks, deformation).

• Common Issues:

  • Cable slippage: Retighten screws; check for worn clamp.

  • Cable damage: Relocate clamp; avoid sharp edges.

  • Clamp cracking: Replace with OEM part (A99L‑0035‑0001).

7. ORDERING INFORMATION

• Model: A99L‑0035‑0001

• Description: CLAMP, CABLE – FANUC ROBOT ACCESSORY