A06B-6130-H404
Description
1. General Description
2. Model Information
Part Number: A06B-6130-H404
Type: Separate Regenerative Discharge Resistor
Applicable Amplifiers: βiSV‑4A, βiSV‑20A, βiSVM‑40i, βiSVM‑80i (200V series)
Related Manual: B‑65322EN (βi Servo Amplifier Manual)
3. Electrical Specifications
Resistance: 30 Ω ±5%
Continuous Rated Power: 300 W
Peak Power (10% duty): 600 W
Applicable Voltage: 200–240 V AC (3‑phase, 50/60 Hz)
Connection Interface: CX23 (βiSV), CZ6 (βiSVM)
Duty Cycle: Intermittent (for deceleration/regeneration periods only)
4. Mechanical & Environmental
Construction: Aluminum finned housing, high‑temperature silicone insulation
Dimensions (W × H × D): 80 mm × 250 mm × 35 mm
Weight: Approx. 1.6 kg
Operating Temperature: 0 °C to +55 °C (non‑condensing)
Storage Temperature: −20 °C to +60 °C
Relative Humidity: 5%–95% RH (non‑condensing)
Protection Class: IP20 (for cabinet mounting only)
5. Compatibility
Servo Amplifiers: βiSV‑4A, βiSV‑20A, βiSVM‑40i, βiSVM‑80i (200V)
CNC Systems: FANUC 0i‑MD/TD, 30i/31i/32i‑B (200V power config)
Typical Applications: Vertical machining centers, vertical lathes, hoists, high‑inertia rotary axes, and equipment with frequent rapid acceleration/deceleration.
6. Features
High power dissipation for heavy regenerative loads.
Finned aluminum case for improved cooling efficiency.
Direct plug‑in to standard servo amplifier resistor ports.
Protects drives from overvoltage faults during heavy deceleration.
7. Installation Instructions
Mount vertically inside the electrical cabinet.
Maintain minimum 50 mm clearance on all sides for ventilation.
Connect only to the designated resistor connector (CX23/CZ6) on the servo amplifier.
Ensure all AC and DC power is disconnected before wiring.
8. Safety Precautions
Surface temperature can exceed 100 °C during/after operation—do not touch.
Use only genuine FANUC A06B‑6130‑H404 to ensure safety and compatibility.
Incorrect resistance or undersized power rating may cause overheating or drive damage.
Get a Quote