1. General Information

• Part Number: A06B-6077-K250

• Description: FUSE KIT, 2 ICE CUBE FUSES (1×2A, 1×5A)

• Manufacturer: FANUC

• Applicable Series: α Series Servo Amplifiers (A06B-6073, A06B-6079, etc.)

• Weight: Approx. 0.03 kg (0.06 lbs)

• Voltage Rating: 250V AC

• Fuse Type: ICE cube (cartridge) fuse, fast-acting

2. Kit Contents

• 1 pc × 2A / 250V AC fuse

• 1 pc × 5A / 250V AC fuse

• No additional hardware or accessories

3. Applications

• Protection of FANUC α series servo amplifier power supply circuits

• Suitable for A06B-6073‑H*** / A06B-6079‑H*** servo modules

• Used in CNC machine tools, industrial automation systems

4. Safety Precautions

• Disconnect power before replacing fuses; wait until the charging LED is off.

• Use only specified 2A/5A, 250V AC fuses; do not substitute with other ratings.

• Ensure correct fuse orientation and firm seating in the holder.

• Repeated fuse blowing indicates a fault; inspect the amplifier and wiring before replacement.

5. Installation Steps

1. Shut down the system and disconnect the main power.

2. Remove the servo amplifier front cover or fuse access panel.

3. Locate the fuse holder(s) on the power supply board.

4. Replace the blown fuse with the corresponding rating (2A or 5A) from the kit.

5. Reinstall the cover, restore power, and verify normal operation.

6. Specifications

7. Ordering & Notes

• Non‑returnable; check compatibility before ordering.

• For use with FANUC α series servo amplifiers; refer to manual B‑65162E for details.