Product Overview

Basic Information

• Part Number: 51305348100 (51305348‑100)

• Module Type: 16‑Channel Isolated Analog Output Module

• Compatible System: Honeywell TDC3000 / TPS

• Manufacturer: Honeywell

• Country of Origin: USA

• Weight: Approx. 0.32 kg (0.71 lb)

• Certification: CE, UL, CSA

• Status: Discontinued (new/remanufactured available)

Technical Specifications

• Output Channels: 16 isolated channels (single‑ended)

• Signal Ranges: 4–20 mA (default), 0–20 mA, 0–10 V (software configurable)

• Resolution: 12‑bit (4096 steps)

• Accuracy: ±0.1% of full scale (25°C)

• Isolation: Channel‑to‑chassis 2500 VAC, channel‑to‑channel 500 VAC

• Power Supply: 24 VDC ±10% (from I/O chassis backplane)

• Operating Temperature: 0°C to +60°C

• Storage Temperature: ‑40°C to +85°C

• Humidity: 5%–95% RH, non‑condensing

• Mounting: Standard slot in 5/10‑slot TDC3000 I/O chassis

Key Features

1. 16 Isolated Outputs: High‑density design reduces chassis space and wiring cost.

2. Software‑Configurable Ranges: Switch between current/voltage outputs without hardware changes.

3. High Precision & Stability: 12‑bit resolution and ±0.1% accuracy ensure reliable process control.

4. Enhanced Isolation: Protects module and system from ground loops and electrical noise.

5. Diagnostic LEDs: Front‑panel indicators for power, module status, and channel faults.

6. TPS/TDC3000 Native Support: Seamless integration with LCN/UCN networks and system diagnostics.

Application Scope

• Industries: Power generation, petrochemical, oil & gas, pulp & paper, metallurgy, pharmaceuticals.

• System Role: Analog output interface for TDC3000/TPS control systems.

• Use Cases:

  • Driving control valves, motor actuators, and variable‑frequency drives (VFDs).

  • Providing setpoints to field transmitters and secondary controllers.

  • High‑density analog output requirements in process control rooms.

Installation & Wiring

1. Power Off: De‑energize the I/O chassis before insertion/removal.

2. Chassis Installation: Insert into a dedicated slot and secure with screws.

3. Wiring:

   • Connect field devices to channel terminals (CH1–CH16).

   • Use shielded twisted‑pair cables; connect shield to chassis ground at one end.

4. Configuration: Use TPS/TDC3000 engineering tools to set output ranges and channel parameters.

5. ESD Protection: Wear anti‑static wristbands and use ESD‑safe work surfaces during handling.

Maintenance Requirements

• Periodic Inspection: Check wiring terminals for looseness, corrosion, or damage.

• Cleaning: Wipe dust with a dry soft cloth; avoid liquid cleaners.

• Replacement: Use original/authorized Honeywell parts; do not disassemble the module.

• Fault Handling:

  • Check LED status indicators for power/channel faults.

  • Verify wiring and field device integrity.

  • Use TPS system diagnostics to identify module/channel errors.

Safety Notice

• All wiring and maintenance must be performed with the chassis power disconnected.

• Do not exceed rated temperature/humidity limits.

• Unauthorized modification or disassembly is prohibited.

• Comply with site safety rules and ESD procedures.