Product Overview

Basic Information

• Part Number: 51305072400 (51305072‑400)

• Module Type: CLCN‑A/B Redundant LCN I/O Paddle Board

• Compatible System: Honeywell TDC3000 / TPS

• Manufacturer: Honeywell

• Country of Origin: USA

• Weight: Approx. 0.16 kg (0.35 lb)

• Certification: CE, UL

• Status: Discontinued (original Honeywell; new/remanufactured available)

Technical Specifications

• Network Interface: Dual CLCN‑A + CLCN‑B (redundant ports)

• Node Address: Configurable via slide switches (not jumpers)

• Power Supply: Powered by chassis backplane

• Operating Temperature: ‑10°C to +55°C

• Storage Temperature: ‑20°C to +70°C

• Humidity: 5%–95% RH, non‑condensing

• Mounting: Dedicated slot in standard 5/10‑slot chassis

Key Features

1. Redundant LCN Ports: Dual CLCN‑A/B interfaces for fault‑tolerant communication.

2. Slide‑Switch Addressing: Easy, reliable node ID setup via front‑panel slides (no jumpers).

3. Chassis Bus Bridging: Transfers data between I/O cards and redundant LCN network.

4. High Availability: Enables seamless switchover between A/B networks if one fails.

5. Diagnostic Support: Reports link status and network health to the TDC3000 system.

Application Scope

• Industries: Power, chemical, oil & gas, pulp & paper, metallurgy (critical processes).

• System Role: Redundant LCN communication hub for TDC3000/TPS I/O chassis.

• Use Case: Installed in 5/10‑slot chassis where LCN redundancy is required (A/B active‑standby).

Installation & Wiring

1. Power Off: De‑energize chassis before insertion/removal.

2. Chassis Installation: Insert into dedicated slot and secure.

3. CLCN Connections: Connect LCN‑A cable to Port A, LCN‑B cable to Port B.

4. Address Setting: Use slide switches to set unique LCN node ID.

5. ESD Protection: Wear anti‑static wristbands during handling.

Maintenance Requirements

• Periodic Inspection: Check A/B cable connections and switch settings for looseness/corrosion.

• Cleaning: Wipe dust with dry soft cloth; avoid liquid cleaners.

• Replacement: Use original/authorized Honeywell parts; do not disassemble.

• Fault Handling: Verify A/B cables and switch settings if communication fails; check system diagnostics.

Safety Notice

• All wiring/maintenance must be performed with power disconnected.

• Do not exceed rated temperature/humidity limits.

• Unauthorized modification/disassembly is prohibited.

• Comply with site safety rules and ESD procedures.