Product Overview

Basic Information

• Part Number: 51305072200 (51305072‑200)

• Module Type: CLCN‑A I/O Paddle Board

• Compatible System: Honeywell TDC3000 / TPS

• Manufacturer: Honeywell

• Country of Origin: USA

• Weight: Approx. 0.16 kg (0.35 lb)

• Certification: CE, UL

• Status: Discontinued by manufacturer

Technical Specifications

• Network Interface: CLCN‑A (single LCN port, non‑redundant)

• Node Address: Configurable via on‑board jumpers

• Power Supply: Powered by chassis backplane

• Operating Temperature: ‑10°C to +55°C

• Storage Temperature: ‑20°C to +70°C

• Humidity: 5%–95% RH, non‑condensing

• Mounting: Dedicated slot for standard 5/10‑slot chassis

Key Features

1. CLCN‑A Interface: Dedicated port for Control LCN network communication.

2. Jumper‑Configured Node ID: On‑board jumpers set unique LCN node address.

3. Chassis Bus Bridging: Transfers data between chassis I/O cards and LCN.

4. Compact Design: Optimized for TDC3000 5/10‑slot chassis installation.

5. Status Indication: Supports system diagnostic reporting for link health.

Application Scope

• Industries: Power, chemical, oil & gas, pulp & paper, metallurgy.

• System Role: CLCN‑A communication interface for TDC3000/TPS I/O chassis.

• Use Case: Installed in 5/10‑slot chassis to enable LCN connectivity and node addressing (non‑redundant A‑only version).

Installation & Wiring

1. Power Off: De‑energize chassis before insertion/removal.

2. Chassis Installation: Insert into dedicated slot and secure.

3. CLCN‑A Connection: Connect LCN‑A cable to the CLCN‑A port.

4. Address Setting: Configure on‑board jumpers for unique node ID.

5. ESD Protection: Wear anti‑static wristbands during handling.

Maintenance Requirements

• Periodic Inspection: Check cable connections and jumper settings for looseness/corrosion.

• Cleaning: Wipe dust with dry soft cloth; avoid liquid cleaners.

• Replacement: Use original Honeywell parts; do not disassemble.

• Fault Handling: Verify CLCN‑A cable and jumper settings if communication fails.

Safety Notice

• All wiring/maintenance must be performed with power disconnected.

• Do not exceed rated temperature/humidity limits.

• Unauthorized modification/disassembly is prohibited.

• Comply with site safety rules and ESD procedures.