Product Overview

Basic Information

• Part Number: 51305072100 (51305072‑100)

• Module Type: LCN I/O Paddle Board

• Compatible System: Honeywell TDC3000 / TPS

• Manufacturer: Honeywell

• Country of Origin: USA

• Dimensions: 238 × 135 × 30 mm (9.4 × 5.3 × 1.2 in)

• Weight: Approx. 0.18 kg (0.4 lb)

• Certification: CE, UL

• Status: Discontinued by manufacturer

Technical Specifications

• Network Interface: LCN‑A / LCN‑B (dual redundant)

• Node Address: Configurable via on‑board jumpers

• Power Supply: Powered by chassis backplane

• Operating Temperature: ‑10°C to +55°C

• Storage Temperature: ‑20°C to +70°C

• Humidity: 5%–95% RH, non‑condensing

• Mounting: Dedicated slot for standard 5/10‑slot chassis

Key Features

1. Dual LCN Ports: Redundant A/B connections for system control network, ensuring communication reliability.

2. Jumper‑Configured Address: On‑board jumpers set the LCN node ID for the chassis.

3. Chassis Bus Interface: Transfers data between I/O cards in the chassis and the LCN network.

4. Status Monitoring: Works with system diagnostics to report link and node status.

5. Tall Face Plate: Designed for standard TDC3000 I/O chassis installation.

Application Scope

• Industries: Power, chemical, oil & gas, pulp & paper, metallurgy.

• System Role: LCN communication gateway for TDC3000/TPS I/O chassis.

• Use Case: Installed in 5/10‑slot I/O chassis to enable LCN network connectivity and node addressing.

Installation & Wiring

1. Power Off: De‑energize the chassis before insertion/removal.

2. Chassis Installation: Insert into the dedicated slot of a 5/10‑slot chassis and secure.

3. LCN Cable Connection: Connect LCN‑A and LCN‑B cables to the redundant ports.

4. Address Setting: Configure on‑board jumpers to set the unique LCN node address.

5. ESD Protection: Wear anti‑static wristbands during handling.

Maintenance Requirements

• Periodic Inspection: Check LCN cable connections and jumper settings for looseness or corrosion.

• Cleaning: Wipe surface dust with a dry soft cloth; avoid liquid cleaners.

• Replacement: Use only original Honeywell parts; do not disassemble the board.

• Fault Handling: Check LCN cable connections and jumper settings if communication fails.

Safety Notice

• All wiring and maintenance must be performed with power disconnected.

• Do not exceed rated temperature and humidity limits.

• Unauthorized modification or disassembly is prohibited.

• Comply with site safety rules and ESD procedures.