Product Overview

Basic Information

• Part Number: 51304903200 (51304903‑200)

• Module Type: WDI (Wren Drive Interface) I/O Module

• Compatible System: Honeywell TDC3000 DCS

• Manufacturer: Honeywell

• Country of Origin: USA

• Dimensions: 203 × 127 × 25 mm

• Weight: Approx. 150 g

• Certification: CE, RoHS, UL

Technical Specifications

• Power Supply: 24 VDC ±10% (backplane)

• Communication Protocol: TDC3000 proprietary high-speed link

• Input Signals: 24 VDC digital; 0–10 VDC analog (speed/torque feedback)

• Output Signals: 0–10 VDC analog (drive command); 24 VDC digital (enable/run)

• Control Functions: Closed-loop speed, torque, and position regulation

• Isolation: 1500 VDC channel-to-channel

• Operating Temperature: -10°C to +55°C

• Storage Temperature: -20°C to +70°C

• Humidity: 5%–95% RH, non-condensing

• Mounting: Standard TDC3000 I/O rack slot

Key Features

• Dedicated Drive Interface: Optimized for Wren/Winchester drives in industrial automation.

• Enhanced Performance: Improved signal processing and noise immunity vs. 51304903‑100.

• Electrical Isolation: Reduces crosstalk and protects system circuitry.

• Hot‑Swappable: Online replacement without process shutdown.

• Self‑Diagnostics & LEDs: Power, run, and fault indicators for real‑time status.

• Conformal Coating: Protects against dust, moisture, and harsh chemicals.

Application Scope

• Industries: Power, chemical, oil & gas, pulp & paper, metallurgy.

• Equipment: Variable‑speed motors, actuators, conveyors, pumps, fans.

• System Role: TDC3000 DCS interface for closed‑loop motor control and health monitoring.

Installation & Wiring

1. Power Off: De‑energize the rack before insertion/removal.

2. Rack Installation: Insert into a standard TDC3000 I/O slot and secure.

3. Signal Wiring: Use shielded twisted‑pair cables; separate from high‑voltage lines.

4. Grounding: Single‑point grounding to avoid ground loops.

5. ESD Protection: Wear anti‑static wristbands during handling.

Indicator Description

• PWR (Green, steady): Power supply normal.

• RUN (Green, flashing): Module communicating and operating normally.

• FLT (Red, on): Module fault, communication loss, or drive error.

Maintenance Requirements

• Periodic Inspection: Check connections and terminals for looseness or corrosion.

• Cleaning: Wipe surface dust with a dry soft cloth; avoid liquid cleaners.

• Replacement: Use only original Honeywell parts; do not disassemble the board.

• Fault Handling: Address red FLT alarms promptly to avoid process impact.

Safety Notice

• All wiring and maintenance must be performed with power disconnected.

• Do not exceed rated voltage, current, or temperature limits.

• Unauthorized modification or disassembly is prohibited.

• Comply with site safety rules and ESD procedures.