51304754150 is a 16-channel high level analog input processor applied to Honeywell Experion PKS, C300, C200 and TDC3000 DCS systems. It collects multi-type industrial analog signals with high precision.

Part Number: 51304754150Model: MC-PAIH03Module Type: 16-channel analog input processorApplicable System: Experion PKS, C300, C200, TDC3000Installation: Standard UCN I/O rack mountingSurface Treatment: Conformal coatingCertification: CE, RoHS, UL, EMC compliant

Input Channel: 16 differential analog input channelsAvailable Signal: 0-5V, 1-5V, 0.4-2V voltage, 4-20mA currentAD Conversion Resolution: 16 bitMeasurement Accuracy: ±0.075% full scale under normal temperatureCommon mode rejection ratio: 70dBSingle channel sampling speed: 4 samples per secondPower Supply: 24VDC backplane powerPower Consumption: ≤12WOperating Temperature: 0℃ to 60℃Storage Temperature: -40℃ to 85℃Humidity Range: 5% to 95% RH, non-condensation

High density 16-channel design improves signal collection efficiency. Excellent anti-interference capability restricts common mode noise. Conformal coating adapts to humid, dusty and corrosive working sites. Multiple standard industrial signal types are supported. Hot swappable design realizes online module replacement. Complete self-diagnosis function detects channel and module faults in time. LED lights display real-time working status clearly.

Suitable for power, chemical, petroleum and water treatment industries. It acquires temperature, pressure, flow and liquid level signals from field transmitters.

Cut off power supply before installing or removing the module. Place and lock the module firmly inside the rack slot. Adopt shielded twisted-pair wire for signal connection. Keep signal cables away from high voltage power circuits. Apply single-end shielding grounding to reduce interference. Take electrostatic protection measures during operation.

Green PWR light steady on means normal power supply. Green RUN light flashing indicates stable running state. Red FLT light on represents module or channel failure. Channel indicators show effective input signal status.

Check wiring connection status regularly to avoid loose contact. Clean surface dust only with dry soft cloth. Replace damaged parts with original Honeywell products only. Carry out fault troubleshooting immediately once abnormal alarm occurs.

All wiring and maintenance work shall be done under power-off condition. Do not use the module beyond rated temperature and signal range. Unauthorized disassembly and internal modification are prohibited. Comply with field safety regulations during daily operation.