51304748175 is an 8-channel analog input field termination assembly suitable for Honeywell Experion PKS, C300, C200 and TDC3000 DCS systems. It adopts galvanic isolation design and fits harsh industrial working environments.

Part Number: 51304748175Model: MC-TAIX02Module Type: 8-channel analog input FTAApplicable System: Experion PKS, C300, C200, TDC3000Installation Mode: Standard UCN rack mountingSurface Treatment: Conformal coatingCertification: CE, RoHS, UL, EMC compliant

Input Channel: 8 isolated analog input channelsInput Signal: 4-20mA, 0-10VDC configurableIsolation Voltage: 500Vrms channel to chassis isolationResolution: 16 bitBasic Accuracy: ±0.1% full scale at normal temperaturePower Supply: 24VDC backplane powerPower Consumption: ≤10WOperating Temperature: 0℃ to 60℃Storage Temperature: -40℃ to 85℃Ambient Humidity: 5% to 95% RH, non-condensation

High density eight-channel structure saves cabinet space. Galvanic isolation effectively restrains signal interference and ground loop impact. Conformal coating provides reliable protection against dust, moisture and corrosion. Hot swap function supports online module replacement without system stop. Multiple analog signal types can be configured via system software. LED indicators clearly display power, operation and fault conditions.

Widely used in power, chemical, petroleum and water treatment industries. It collects real-time data from temperature, pressure, flow and liquid level field transmitters.

Cut off power before installing or dismantling the module. Fix the module steadily at designated rack position. Apply shielded twisted-pair cable for signal wiring. Keep signal cables isolated from high voltage power lines. Implement single end shield grounding to reduce interference. Take electrostatic protection measures during operation.

Green PWR light steady on means normal power supply. Green RUN light flashing represents regular running status. Red FLT light on refers to module or channel abnormal failure. Channel indicator lights reflect real-time input signal status.

Regularly check wiring tightness and terminal connection condition. Clean surface dust only with dry soft cloth. Replace defective module with original Honeywell spare parts. Troubleshoot promptly once fault alarm appears during operation.

All wiring and maintenance work must be carried out under power-off state. Do not operate the module beyond rated temperature and voltage range. Unauthorized disassembly and internal modification are strictly forbidden. Abide by industrial safety regulations during field operation and maintenance.