1. Product Overview

2. Basic Information

3. Technical Parameters

4. Main Features

1. Compatible with general instrument and intrinsically safe field equipment

2. Built-in auxiliary power output for on-site sensor power supply

3. High galvanic isolation suppress interference and ground loop

4. Conformal coating adapts to humid and corrosive environment

5. Channel open and short circuit fault diagnosis function

6. Hot swappable design for non-stop maintenance

7. Clear LED status indication

5. Application Scope

6. Installation Instructions

1. Cut off power before installing or removing the module.

2. Fix the module firmly at the designated rack position.

3. Use shielded twisted-pair cable for signal wiring.

4. Separate signal cables from high voltage power lines.

5. Implement single end shield grounding to avoid interference.

6. Take electrostatic protection measures during operation.

7. Indicator Definition

8. Maintenance Requirements

1. Regularly check wiring connection and module surface condition.

2. Clean dust only with dry cloth, no corrosive liquid.

3. Inspect and eliminate faults immediately once alarm appears.

4. Replace with original Honeywell spare parts only.

9. Safety Notice

1. All wiring and maintenance work must be carried out under power-off state.

2. Do not operate beyond rated temperature and voltage range.

3. Forbid disassembling and modifying internal module structure.

4. Follow intrinsic safety wiring rules in hazardous working areas.