1. Product Overview

2. Part Number & Physical Details

• Part Number: 51304718200 (51304718‑200)

• Module Type: High Level Analog Input (UCN)

• Applicable Systems: Honeywell TDC3000, Experion PKS, UCN DCS

• Dimensions: 318 × 29 × 278 mm

• Weight: Approx. 0.9–1.0 kg

• Mounting: Standard UCN/APM rack slot

3. Technical Specifications

• Input Channels: 16 isolated analog inputs

• Signal Types (per channel, configurable):

  • Current: 4–20 mA (250 Ω shunt optional)

  • Voltage: 0–10 V, ±5 V, ±10 V

• Isolation: Enhanced point‑to‑chassis, point‑to‑point galvanic isolation (250 Vrms)

• Resolution: 16‑bit

• Accuracy: ±0.05% FS (25 °C) (best‑in‑class for the series)

• Power Supply: 24 VDC (backplane‑fed)

• Power Consumption: ≤ 10 W

• Operating Temperature: 0 °C to +60 °C

• Storage Temperature: −40 °C to +85 °C

• Humidity: 5–95% RH, non‑condensing

• Certifications: CE, RoHS, UL, Honeywell EMC compliant

• Coating: Conformal coated PCB for harsh environments

• Diagnostics: Channel‑level fault detection (open/short circuit, overrange)

4. Key Features

1. 16‑Channel Enhanced Isolation: Each channel is galvanically isolated from chassis and other channels, eliminating ground loops and protecting against common‑mode voltage.

2. Software‑Configurable Ranges: Select mA/V ranges via Honeywell Process Control Designer (no hardware jumpers).

3. High Noise Rejection: Upgraded EMI/RFI filtering for high‑noise industrial plants (power, chemical, oil & gas).

4. Hot‑Swappable: Online replacement without system shutdown (minimizes downtime).

5. Advanced LED Status Indicators:

   • PWR (Green): Steady = power normal; Flashing = power fault

   • RUN (Green): Flashing = module active; Steady = fault

   • FLT (Red): On = channel fault; Flashing = critical module error

6. Channel‑Level Diagnostics: Detects open/short circuits, overrange, and sensor faults for quick troubleshooting.

5. Application Range

• Target Systems: Honeywell TDC3000, Experion PKS, UCN DCS

• Industries: Power generation, chemical, oil & gas, refining, water treatment, pharmaceuticals

• Function: Monitor transmitters (pressure, flow, level, temperature) via 4–20 mA/0–10 V signals; ideal for critical control loops requiring high accuracy and reliability.

6. Installation Instructions

1. ESD Protection: Wear anti‑static gloves/wristband before handling.

2. Power Off: Power off the rack before insertion/removal.

3. Insertion: Insert into standard UCN slot and secure with screws.

4. Wiring: Use shielded twisted‑pair (STP) cable for field inputs (18–22 AWG).

5. Cable Routing: Route cables away from high‑voltage lines (≥ 30 cm separation).

6. Grounding: Ground shields at one end only (control room side) to avoid ground loops.

7. Maintenance Notes

• Quarterly Inspection: Check connections for tightness; clean with dry cloth only.

• Cleaning: Avoid harsh solvents (use isopropyl alcohol only if necessary).

• Spare Parts: Use only genuine Honeywell spares for replacement.

• Fault Troubleshooting (FLT LED On):

  1. Check field wiring for open/short circuits.

  2. Verify input range matches transmitter output.

  3. Check shunt resistor (250 Ω) for 4–20 mA signals.

  4. Replace module if fault persists.

8. Safety Requirements

• Power Off: All wiring/maintenance must be done with power off.

• Voltage Rating: Do not exceed 30 VDC on input channels.

• Temperature: Do not operate above +60 °C or below 0 °C.

• No Disassembly: Do not open or modify the module (voids warranty).

• ESD Protection: Handle only in ESD‑protected areas.