1. Product Overview

2. Part Number & Revision

• Model: 51304672150 (51304672-150)

• Assy No: 51304672-150

• Hardware: Rev J

• Firmware: Rev D

• Weight: approx. 310 g

• Dimensions: 142 × 71 × 25 mm

3. Technical Specifications

• Channels: 8 isolated analog outputs

• Output Signals:

  • Current: 4–20 mA (sink/source)

  • Voltage: 0–10 VDC

• Accuracy: ±0.1% FS @ 25 °C

• Resolution: 16‑bit

• Load Limits:

  • Current: ≤ 600 Ω

  • Voltage: ≥ 1 kΩ

• Isolation: Channel‑to‑channel & channel‑to‑bus

• Power: 24 VDC (backplane‑supplied)

• Operating Temp: 0 °C to +60 °C

• Storage Temp: −40 °C to +85 °C

• Certifications: CE, RoHS, UL

4. Key Features

• 8‑channel high‑precision analog output

• Per‑channel short‑circuit & overload protection

• LED status indicators (PWR/RUN/FLT)

• Hot‑swappable (no system shutdown required)

• Redundancy‑capable for high‑availability systems

• DIN‑rail / rack‑mount compatible

5. Applications

• Honeywell DCS/Experion process control

• Chemical, petrochemical, power, water treatment

• Industrial automation: valves, actuators, motor drives

• Building HVAC & facility management

6. Installation & Wiring

1. Power Off: Disconnect system power before installation.

2. Rack Insertion: Slide module into designated I/O rack slot; secure latch.

3. Field Wiring:

   • Use shielded twisted‑pair (STP) (22–18 AWG).

   • Ground shield only at control room end to avoid ground loops.

   • Terminate per channel: +/− for current/voltage.

4. Separation: Keep analog cables ≥ 30 cm from high‑voltage AC lines.

7. LED Indicator Description

• PWR (Green): On = 24 VDC power normal

• RUN (Green): Flashing = normal operation

• FLT (Red): On = fault (short, overload, communication error)

8. Maintenance & Troubleshooting

• Inspect: Check connectors, physical damage, corrosion quarterly.

• Clean: Use dry cloth only; no liquid cleaners.

• Fault Handling:

  • If FLT is on: Check field wiring for shorts/overloads.

  • Verify backplane power and rack communication.

• Replacement: Use only Honeywell original modules; power off before removal.

9. Safety Precautions

• Electrical: Disconnect all power before wiring/maintenance.

• Environmental: Avoid moisture, dust, corrosive gases beyond ratings.

• Modification: Do not alter hardware/firmware; use OEM replacements.

10. Ordering Information

• Part Number: 51304672150 (51304672-150)

• Description: Honeywell 8‑Channel Analog Output Module, Rev J/D

• Compatible Systems: Honeywell Experion, TDC3000, UCN I/O Racks