Kolmorgen AKM42E-ANC2R-00 Servo Motor Detailed Product Description

I. Complete Model Interpretation

Main Model: AKM42E

AKM: Kolmorgen Permanent Magnet Synchronous Servo Motor Series

4: 4-inch base → 115mm IEC square flange

2: Stator Stack Length 2 → Medium body, medium-high torque, balancing inertia and output

E: 480V high-voltage winding, compatible with 3-phase 400-480V AC, DC bus 640V DC

Configuration Code: ANC2R

A: Installation → 115×115mm IEC standard square flange

N: Shaft Type → Smooth shaft without keyway, shaft end with fixed installation screw holes

C: Feedback → SFD 24-bit multi-turn intelligent absolute value encoder

2: Brake → Built-in 24VDC power-off electromagnetic brake (power-off self-locking, preventing vertical shaft sliding)

R: Outlets → M23 rotatable integrated connector (power + feedback integrated, 360° free wiring)

Suffix: 00

Standard original factory configuration, no special customization, IP65 overall protection, F-class insulation, standard lifetime lubricated bearings.

II. Core Electrical Parameters

Continuous no-load torque: 3.45 N·m

Rated torque: 2.75 N·m

Peak torque: 11.5 N·m

Rated power: 1.15 kW

Maximum speed: 5500 rpm

Compatible power supply: 3-phase 400-480V AC

DC bus: 640V DC

Rated current: 2.75 A RMS

Insulation class: F-class 155℃

Rotor inertia: Medium inertia, balancing dynamic response and medium-heavy load output

III. Feedback System (SFD Intelligent Multi-turn Absolute Value)

Type: SFD Smart Feedback Device 24-bit multi-turn absolute value

Single-turn resolution: 8,388,608 ppr

Multi-turn memory: 4096 turns

Core advantages:

No battery design, maintenance-free

Power-on direct reading of absolute position, no mechanical zero return

Driver automatically identifies motor parameters, one-click self-tuning

Strong anti-interference, suitable for industrial complex electromagnetic environment, long-distance wiring

IV. Mechanical Structure Specifications

Installation Flange: 115×115mm IEC square flange

Shaft Diameter: φ19mm smooth shaft without keyway

Shaft Extension: Standard industrial shaft extension, shaft end with installation screw holes

Brake Specifications: 24VDC power-off brake, power-off self-locking, compatible with vertical lifting, flipping mechanism

Connector: M23 rotatable integrated plug, 360° arbitrary angle wiring, saving cabinet space

Protection Grade: IP65 body + shaft end, dust-proof, splash-proof

Overall weight: approximately 3.4kg

Bearings: Industrial-grade lifetime lubricated maintenance-free bearings

V. Environment and Certification

Operating Temperature: -20℃ ～ +40℃ (rated non-reducing capacity)

Storage Temperature: -30℃ ～ +85℃

Relative Humidity: 5%～95% RH, no condensation

Vibration / Shock: Industrial-grade high vibration design

Compliance Certification: CE, UL, cULus, RoHS

VI. Core Product Features

480V high-voltage E-winding

Compatible with industrial 400/480V high-voltage power grid, low loss in long-distance wiring, small working current, high system stability.

115mm IEC standard flange

Universal industrial installation dimensions, compatibility for new and old equipment replacement, mechanical structure assembly compatibility is extremely strong.

Medium stack high torque

4-inch base medium-long body, medium-heavy load output, balancing dynamic response and load capacity.

SFD High-precision Absolute Value

Power-on no zero return, eliminating the original zero return process, significantly improving debugging and production efficiency. The shaft has no keyway

Compatible with elastic couplings, good alignment, smooth transmission, no keyway stress wear, suitable for high-precision transmission.

Built-in 24V electromagnetic brake

Special for vertical axis, lifting axis, flipping mechanism, safe self-locking in case of power failure, preventing the load from sliding.

M23 rotatable integrated connector

Flexible wiring, convenient installation, resistant to vibration, simple and neat wiring.

IP65 full protection

Suitable for industrial environments with dust and humidity in multi-polluted workshops, capable of continuous operation 24 hours a day.

VII. Compatible with drivers

Compatible with Kolemos 480V high-voltage series:

AKD-P02407, AKD-P03607

AKD2G 480V/640V equivalent models

Support: EtherCAT, CANopen, pulse direction, analog quantity, perfect compatibility with SFD automatic recognition.

VIII. Typical applications

Numerical control equipment, laser processing platform, automated production line, packaging and printing machinery, logistics lifting mechanism, vertical manipulator, vertical flipping station;

Specially suitable for 115mm flange, 480V high voltage, medium-heavy load, power-on without zero return, vertical load with brake.

IX. Summary of model in one sentence

AKM42E-ANC2R-00:

115mm IEC square flange, No. 4 mounting base, multi-layer high torque, 480V high voltage, optical shaft without key, SFD multi-turn absolute value, 24V built-in brake, M23 rotatable integrated connector, IP65 protection servo motor;

Positioning: universal high voltage, medium-heavy load high precision, power-on without zero return, vertical axis safety locking, strong installation interchangeability.