Honeywell 51204168150 (51204168-150) Product Detailed Description

Model: 51204168150

Brand: Honeywell

Product Type: TDC3000 / TPS / UCN System 16-channel Digital Output Module (DO)

Compatible Systems: TDC3000, TPS, Experion PKS UCN Control System

I. Product Overview

51204168-150 is a 16-channel digital output master card of the Honeywell UCN network, belonging to the HPM/APM controller I/O component. It is used to convert system control signals into on-site switch signals to drive solenoid valves, relays, indicator lights, motor start-stop circuits and other equipment. It is of the same series but a different version from 51204168-100, and the output characteristics and application scenarios are consistent. 

II. Core Specification Parameters

Number of channels: 16 independent digital outputs

Output type: Transistor output (source type / drain type selectable)

Output voltage: 24V DC for load driving

Output capacity:

Single channel: 0.5A @ 24V DC

Total load: ≤ 8A (entire module)

Isolation characteristics: Full electrical isolation between channels, system side - field side (voltage withstand ≥ 1500V AC)

Response time: ≤ 10ms

Operating voltage: 24V DC system power supply

Operating environment:

Temperature: -20℃ ~ +70℃

Humidity: 5% ~ 95% RH (no condensation)

Installation method: Standard DCS cabinet rail installation

Weight: Approximately 1.2kg

Guarantee: Original factory 12-month standard guarantee

III. Main Functions

16-channel independent control: Each channel outputs independently without interference

High isolation protection: Effectively isolates field interference, protecting the system controller

Overcurrent protection: Built-in overcurrent protection in each channel to prevent short circuit damage

Status indication: Panel LED displays the output status of each channel

Hot-swappable support: Supports online maintenance without affecting system operation

Wide compatibility: Compatible with 24V DC various field loads

IV. System Adaptation and Pairing Components

Adaptation controller: HPM (High Performance Process Manager), APM (Advanced Process Manager)

Pairing FTA terminal board: 51204166-125 / 51204166-175 (MC-APITY62)

Compatible systems: TDC3000, TPS, Experion PKS UCN

Model interchange: 51204168-100 (Hardware pins, functions are completely the same, can be directly replaced)

V. Installation and Usage Tips

The module is installed on standard rails, fixed firmly, and well ventilated

Output cables use shielded cables, and are laid separately from power cables

Capacitive loads need to be paralleled with continuous diodes to suppress reverse electromotive force

Single-channel load should not exceed 0.5A to avoid overheating

Before wiring, confirm the power polarity, load type, and voltage

VI. Order Information

Order model: 51204168150

Product name: 16-channel 24V DC digital output module (UCN system)

Matching components: Requires pairing with 51204166-125 / 175 FTA terminal board

Interchangeable model: 5120416810