Honeywell 51199930-100 (51199930100) Product Detailed Description

I. Product Basic Information

Model: 51199930-100 (51199930100)

Brand: Honeywell

Series: SPS5713 / SPA5713

Product Type: 24V DC Enhanced Power Module for DCS System (UCN/TP/HPM Specific)

Function Position: Provides high-performance 24V regulated power supply for TDC3000 / TPS / UCN control stations, high-power I/O cards, field instruments, actuators

Applicable Systems: HPM / APM / UCN nodes, TDC3000, TPS, PKS control cabinets

Difference from 51199929100: Higher power, stronger output current, better redundancy capability

II. Core Technical Parameters

1. Input Specifications

Input Voltage: 24 VDC (nominal), wide range 12 ~ 48 VDC

Input Current: Typical 0.8A ~ 1.5A

Polarity Protection: Anti-reverse connection, anti-surge, overvoltage clamping

2. Output Specifications (Main Output)

Output Voltage: 24 VDC ±0.5% (High-precision regulation, superior to 51199929100)

Output Current: 8A continuous (maximum 10A peak)

Output Power: 192W (24V×8A)

Ripple Noise: < 30mVpp (Low noise, suitable for precise analog quantities)

Load Regulation Rate: < 0.2% (Full load variation)

Short Circuit Protection: Electronic current limiting + hiccup recovery + overheat shutdown

3. Environment and Temperature

Operating Temperature: -20℃ ~ +60℃ (full load)

Extended Temperature (derated): -40℃ ~ +85℃ (derated 30%)

Relative Humidity: 5%–95% RH (no condensation)

Altitude: Maximum 3000m

Protection Grade: IP30 (industrial control cabinet)

4. Structure and Installation

Installation Method: Standard DIN rail or cabinet slot (compatible with 51199929100 installation position)

Size (approx.): 130 × 110 × 55 mm

Weight (approx.): 0.7 kg

Heat Dissipation: Natural air cooling + large heat dissipation surface, no fan required

Insulation Voltage Rating: Input–Output 2.5kVAC, Input–Ground 2kVAC

5. Protection Features

Output Short Circuit / Overcurrent / Overvoltage / Overheat Protection

Input Reverse Connection / Surge / ESD Protection

Redundant Parallel Automatic Current Sharing (no additional current sharing module required)

6. Certification CE / UL / RoHS / IEC 61010

III. Main Functions

High-power 24V system power supply

Provide stable and high-precision 24V DC for TDC3000/TPS/UCN control stations, high-power I/O cards, field transmitters, valve positioners, actuators, etc.

Wide voltage input compatibility

Support 12–48VDC input, which can be directly connected to the 24V bus or 48V battery group, suitable for redundant power supply architecture.

Precise voltage regulation + low ripple

±0.5% voltage regulation accuracy, <30mVpp low noise, ensuring the accuracy of 4–20mA analog signals, suitable for pharmaceutical, chemical precision control.

Strong redundant parallel capability

Multiple 51199930-100 units can be directly paralleled for redundancy, automatic current sharing, automatic fault isolation, constructing a 24V power system without single-point failure (more suitable for large-load redundancy than 51199929100).

Complete protection + automatic recovery

Automatic restart after short circuit, overcurrent, overheating, no need for manual intervention, improving system availability.

Status diagnosis and LED indication

LED indicators for normal (PWR), fault (FAULT), overload (OL), facilitating quick on-site judgment.

IV. Typical Application Scenarios

Petrochemical: 24V system power supply for DCS control cabinets, high-power I/O card power supply, field instruments / valve clusters

Electricity (thermal power / hydropower): TPS/UCN control stations, boiler / turbine auxiliary control systems, electric actuators

Papermaking / pharmaceuticals / water treatment: Precision analog instruments, valve positioners, sensors, actuator power supply

Metallurgy / cement: 24V regulated power supply in high-temperature, high-dust environments, large-load redundant system

Large-scale process industry: Core 24V power supply for highly reliable DCS control cabinets, replacing 51199929100 for upgrade and expansion

V. Installation and Wiring Tips

Installation location: DIN rail installation in the control cabinet, away from strong heat sources, ensuring ventilation (compatible with 51199929100 installation position).

Input wiring:

Connect 12–48VDC, pay attention to positive and negative poles

It is recommended to add a fuse (10A) + surge protector at the front end

Output wiring:

24VDC output to system bus, I/O card, field equipment

When paralleling multiple units, connect the same polarity at the output end, wire diameter ≥ 2.5mm², try to keep the length short, impedance consistent

Heat dissipation and environment:

Control the ambient temperature within -20℃ ~ +60℃

Avoid dust, oil stains, corrosive gases

VI. Maintenance and Fault Troubleshooting

Daily maintenance

Quarterly: Check terminal fixation, clean surface dust, check indicator light status

Annual: Load measurement of output voltage, redundant switching test, load balance check

Common faults

PWR light does not light up: abnormal input voltage, fuse blown, reversed wiring

Low output voltage: heavy load (>8A), environmental over-temperature rating reduction, low input voltage

FAULT light is on: output short circuit, overcurrent, overheating, internal fault

Redundant switching failure: incorrect parallel connection wiring, module model inconsistency, load imbalance, single unit aging

VII. Order Information

Model: 51199930-100 (51199930100)

Series: SPS5713 / SPA5713

Packaging: 1 module, manual, installation accessories

Optional accessories: DIN rail, redundant connection line, fuse kit, surge protector