Product Specification – CPS-150F

1. General Information

• Manufacturer: Yaskawa / Yasnac

• Part Number: CPS-150F

• Product Type: CNC System Switching Power Supply Module

• Applicable Series: Yasnac M64, M65, i80, i100 and other legacy CNC controller systems

• Product Status: Discontinued industrial dedicated power supply, used for CNC equipment maintenance and one-to-one replacement

2. Product Overview

3. Technical Specifications

3.1 Electrical Parameters

• Input Voltage: AC 200–230V, 50/60Hz

• Rated Power: 150W

• Output Voltage Channels:

  • +5V DC

  • ±12V DC

  • +24V DC

• Output Stability: ≤±1%

• Ripple Noise: Low ripple design for CNC logic circuit use

• Protection Function: Over voltage, over current, short circuit, over temperature protection

3.2 Environmental & Physical

• Operating Temperature: 0°C ~ +45°C

• Storage Temperature: -20°C ~ +65°C

• Relative Humidity: 5%–85% RH, non-condensing

• Mounting Mode: Cabinet fixed installation

• Cooling Mode: Natural air cooling

4. Key Features

• Multi-channel DC voltage output, dedicated for Yasnac CNC system

• Industrial grade design, supporting 24-hour continuous operation

• Complete protection mechanism to avoid damage to CNC board caused by abnormal power supply

• Low interference design, adapt to industrial strong electromagnetic environment

• Standard installation size, convenient direct replacement and maintenance

• Stable power supply for CNC main control, display, memory and I/O modules

5. Typical Applications

• Yasnac M64, M65 CNC lathes and machining centers

• i80, i100 series Yaskawa CNC control system

• Legacy CNC equipment renovation and power supply failure replacement

• Industrial automation cabinet dedicated power supply matching

6. Compatibility & Replacement Notes

• Compatibility: Special matching for Yasnac CNC system, not universal with ordinary switching power supplies

• Replacement Requirement: It is recommended to use the same model CPS-150F for one-to-one replacement

• Installation: Must cut off AC power before disassembly and assembly; check each output voltage after installation

• Note: Do not adjust internal parameters at will, to avoid burning CNC circuit boards