Reliance Electric SA3000DC070 AutoMax SA3000 AC/DC Power Module

Overview

Key Features

1. High‑Power AC‑to‑DC Conversion: Accepts three‑phase 460 VAC input and delivers a regulated 621 VDC output, suitable for high‑power drive applications.

2. Heavy‑Duty Industrial Design: Built with a rugged metal enclosure, vibration‑resistant components, and optimized thermal management to ensure reliable operation in harsh conditions.

3. Forced‑Air Cooling: Equipped with an integrated cooling fan to maintain optimal operating temperatures during continuous high‑current operation.

4. Comprehensive Protection: Incorporates overvoltage, undervoltage, overcurrent, short‑circuit, and overtemperature protection to safeguard the module and connected loads.

5. Diagnostic LED Indicators: Front‑panel LEDs display power status, run mode, and fault conditions for quick on‑site troubleshooting and maintenance.

6. Seamless System Integration: Fully compatible with Reliance AutoMax PMI racks, processors, I/O modules, and servo drives, enabling easy integration into new or existing industrial automation systems.

7. Distributed Power Architecture: Designed for use in AutoMax DPS, supporting multi‑axis coordination and centralized power distribution across large‑scale industrial processes.

Technical Specifications

• Manufacturer: Reliance Electric (ABB/Baldor)

• Model: SA3000DC070

• Alternate Part Number: 897.13.50A

• Type: Three‑phase non‑regenerative AC‑to‑DC rectifier module

• Input Voltage: 460 VAC ±10%, three‑phase, 50/60 Hz

• Input Current: 70 A continuous

• Output Voltage: 621 VDC regulated

• Output Current: 87 A continuous

• Power Rating: Approximately 54 kW

• Cooling Method: Forced‑air cooling (integrated fan)

• Operating Temperature: 0°C to +45°C (+32°F to +113°F)

• Storage Temperature: -20°C to +60°C (-4°F to +140°F)

• Humidity: 5%–95% non‑condensing

• Enclosure Rating: IP20 (suitable for cabinet mounting)

• Dimensions (Approx.): 330 mm × 230 mm × 890 mm (13 in × 9 in × 35 in)

• Weight (Approx.): 22.7 kg (50 lbs)

• Mounting: 4‑slot PMI rack‑mountable

Applications

• Metal Processing: Rolling mills, extrusion lines, and wire drawing machines requiring constant DC bus voltage for drive coordination.

• Paper & Pulp: Winders, calenders, and reel drives in paper manufacturing, where stable DC power ensures precise speed and tension control.

• Material Handling: Cranes, hoists, and conveyors with high‑torque, frequent‑cycle operation.

• Mining: Crushers, conveyors, and processing equipment in harsh mining environments.

• Legacy System Upgrades: Direct replacement for older SA3000DC series modules in existing AutoMax DPS installations, minimizing downtime and integration costs.

Compatibility & Availability

• Compatible Systems: Reliance AutoMax PMI processors, DCS 5000 I/O systems, and SA3000 series inverters/servo drives.

• Status: Original production is discontinued; units are available as refurbished, surplus, or used from industrial automation suppliers.

• Refurbished Units: Fully disassembled, inspected, component‑tested, calibrated, and load‑tested to meet original factory specifications, typically with a 1‑year warranty.

Advantages

• High Efficiency: Converts AC to DC with minimal power loss, reducing operational costs and heat generation.

• Reliable Performance: Rugged design and comprehensive protection ensure stable operation in demanding industrial environments.

• Easy Maintenance: Diagnostic LEDs and modular construction enable quick fault detection and component replacement.

• Cost‑Effective Legacy Support: Refurbished SA3000DC070 units provide a reliable, budget‑friendly solution for maintaining aging AutoMax systems.