June 08, 2026

Product Specification: B&R 5CFCRD.2048-03 Industrial CompactFlash Module

The 5CFCRD.2048-03 is an industrial-grade 2048 MB (2 GB) CompactFlash module from B&R Industrial Automation (ABB Group), designed as high-reliability non-volatile storage for B&R industrial keyboards, operator panels, PLCs, and automation controllers. Built with SLC (Single-Level Cell) NAND flash, it delivers long service life and stable performance in harsh industrial environments, supporting 24/7 operation for mission-critical data and system storage.

Description

Product Specification: B&R 5CFCRD.2048-03 Industrial CompactFlash Module

1. Product Overview

2. Basic Product Information

Manufacturer and Model Identity

Manufacturer: B&R Industrial Automation. Model: 5CFCRD.2048-03, part of the 5CFCRD series industrial CompactFlash line. It is a standard Type I CompactFlash card with 2 GB user capacity, optimized for B&R industrial keyboards, Power Panel terminals, PPC controllers, and Panel PC 800 series devices. The module features a rugged industrial design, conformal-coated PCB, industrial-grade components, and flame-retardant plastic housing for enhanced durability.

Electrical Characteristics

Interface: Standard PATA (Parallel ATA), compliant with CompactFlash Association 4.1. Rated voltage: 3.3 V DC ±5%. Current consumption: ≤130 mA (active), ≤30 mA (idle). Data transfer speeds: maximum sequential read 18 MB/s, maximum sequential write 14 MB/s. Supports PIO Mode 0–6, Multi-word DMA Mode 0–4, and Ultra DMA Mode 0–4. Integrated hardware ECC (Error Correction Code), dynamic/static wear leveling, bad block management, and power-fail protection ensure data integrity and extended lifespan.

Physical and Mechanical Properties

Form factor: Type I CompactFlash, dimensions 42.8 mm × 36.4 mm × 3.3 mm. Connector: 50-pin gold-plated, rated for 10,000+ mating cycles. Vibration resistance: 5 g (10 Hz–1 kHz, continuous). Shock resistance: 100 g (1 ms pulse, operational). Ingress protection: IP30 (dust-resistant). Housing: high-impact flame-retardant plastic (UL94 V-0). Weight: approximately 11 g.

Environmental Limits

Operating temperature: 0°C to +70°C. Storage temperature: -55°C to +90°C. Relative humidity: 5%–95% (non-condensing). Altitude: up to 3,000 m (no performance loss). Resistant to mineral oils, lubricants, and industrial dust.

Compliance and Certification

Compliant with CompactFlash Association 4.1, EN 61131-2, UL 60950. Certifications: CE, cULus, DNV GL, RoHS. 100% factory tested for read/write functionality, data integrity, and connector reliability.

3. Function and Product Positioning

Core Functions

Keyboard System Storage: Stores firmware, keymap configurations, and diagnostic software for B&R industrial keyboards; supports bootable operation for integrated keyboard-display units.
Data Logging: Captures keyboard input data, operator actions, system events, and error logs for traceability and maintenance.
Configuration & Profile Management: Saves multiple keyboard layouts, user preferences, and system parameters for rapid setup and switching.
Firmware Updates: Enables on-site firmware upgrades and configuration backups via B&R Automation Studio.
Data Protection: Hardware ECC corrects up to 24 bits per 1024-byte block; power-fail protection prevents corruption during outages.

Operational Features

Plug-and-play design requires no drivers for B&R keyboards and compatible devices. SLC flash provides 100,000 erase/write cycles per block, ideal for frequent configuration updates and data logging. Conformal coating protects against moisture, dust, and corrosion. Low power consumption minimizes the load on keyboard/controller power supplies.

Product Positioning

A high-capacity industrial storage solution for B&R industrial keyboards and mid-range automation systems. It meets the storage demands of advanced keyboard functionality, offering 2 GB capacity with industrial-grade durability, temperature tolerance, and reliability for 24/7 operation in harsh environments where consumer-grade storage fails.

4. Core Performance Parameters

Storage Performance

Capacity: 2 GB. Max sequential read: 18 MB/s. Max sequential write: 14 MB/s. Endurance: 100,000 erase/write cycles per block. Data retention: 10 years at 25°C.

Reliability Performance

Data reliability: <1 unrecoverable error per 10¹⁴ bits read. MTBF: >3,000,000 hours at 25°C. Warranty: 12 months against manufacturing defects. Service life: >10 years under standard industrial use. Lifetime monitoring support: Yes.

Environmental Performance

Operating temperature: 0°C to +70°C. Vibration resistance: 5 g. Shock resistance: 100 g. Ingress protection: IP30.

5. General Matching Accessories

Compatible Hardware

B&R industrial keyboards, Power Panel PP300/PP400/PP500 series, PPC300/PPC700 controllers, Panel PC 800 series, and X20CP series PLCs.

Installation & Protection

ESD-safe storage cases, CF slot dust covers (IP30), contact cleaning kits, heat-resistant labels, and replacement 50-pin connectors.

Software & Documentation

B&R Automation Studio (formatting/backup/restore/firmware updates), official datasheet, user guide, and application notes for keyboard/storage integration.

6. Applicable Equipment and Industry Fields

Primary Applications

Industrial Keyboards: B&R rugged keyboards for factory floor operation, machine control, and data entry.
Machine Tools: CNC centers, multi-axis lathes (keyboard configurations, machining programs, tool parameters).
Packaging Machinery: Filling, cartoning, labeling (operator input logs, recipes, keyboard profiles).
Process Automation: Food/beverage, pharmaceutical, chemical, water treatment (keyboard-based control, data logging).

Secondary Applications

Conveyors, injection molding machines, textile/printing equipment, and industrial PCs (system programs, operational records, keyboard configurations).

Compatibility Notes

Use only 3.3 V Type I CompactFlash; avoid 5 V or Type II cards. Handle with ESD protection. Do not hot-swap during power-on. Regularly back up critical data.

Contact Info