June 08, 2026

Product Specification: B&R 5CFCRD.2048-02 Industrial CompactFlash Module

The 5CFCRD.2048-02 is an industrial-grade 2048 MB (2 GB) CompactFlash module manufactured by B&R Industrial Automation (ABB Group), designed as high-capacity non-volatile storage for B&R touchscreen panels, PLCs, industrial PCs, and automation controllers. Built with SLC (Single-Level Cell) NAND flash, it delivers exceptional reliability, long service life, and stable performance in harsh industrial environments, supporting 24/7 operation for mission-critical applications.

Description

Product Specification: B&R 5CFCRD.2048-02 Industrial CompactFlash Module

1. Product Overview

2. Basic Product Information

Manufacturer and Model Identity

Manufacturer: B&R Industrial Automation. Model: 5CFCRD.2048-02, part of the 5CFCRD series industrial CompactFlash line. It is a standard Type I CompactFlash card with a user-accessible capacity of 2 GB, optimized for B&R Power Panel touchscreens (PP300/400/500 series), PPC controllers, and APC industrial PCs. The module features a rugged industrial design, conformal-coated PCB, industrial-grade components, and flame-retardant plastic housing for enhanced durability.

Electrical Characteristics

Interface: Standard PATA (Parallel ATA), compliant with CompactFlash Association 4.1. Rated voltage: 3.3 V DC ±5%. Current consumption: ≤130 mA (active), ≤30 mA (idle). Data transfer speeds: maximum sequential read 18 MB/s, maximum sequential write 14 MB/s. Supports PIO Mode 0–6, Multi-word DMA Mode 0–4, and Ultra DMA Mode 0–4. Integrated hardware ECC (Error Correction Code), dynamic/static wear leveling, bad block management, and power-fail protection ensure data integrity and extended lifespan.

Physical and Mechanical Properties

Form factor: Type I CompactFlash, with dimensions of 42.8 mm (width) × 36.4 mm (length) × 3.3 mm (height). Connector: 50-pin gold-plated male contact, rated for 10,000+ mating cycles. Vibration resistance: 5 g (10 Hz–1 kHz, continuous operation). Shock resistance: 100 g (1 ms pulse, operational); 3000 g (transportation). Ingress protection: IP30 (dust-resistant). Housing material: High-impact flame-retardant plastic (UL94 V-0). Weight: approximately 11 g.

Environmental Limits

Operating temperature: -40°C to +80°C. Storage temperature: -55°C to +90°C. Relative humidity: 5%–95% (non-condensing). Altitude: Up to 3,000 m (no performance degradation). Chemical resistance: Tolerates mineral oils, lubricants, and common industrial dust.

Compliance and Certification

Compliant with CompactFlash Association 4.1, EN 61131-2, and UL 60950. Certifications: CE, cULus, DNV GL, RoHS (lead-free, halogen-free). 100% factory tested for read/write functionality, data integrity, and connector reliability.

3. Function and Product Positioning

Core Functions

System Storage for Touchscreens: Stores B&R touchscreen operating systems, visualization software, and user interface projects; supports bootable operation for Power Panel series terminals.
Data Logging: Captures touchscreen operation data, user inputs, alarm events, and production statistics for traceability and analysis.
Recipe & Parameter Management: Saves multiple production recipes, machine parameters, and touchscreen configuration profiles for rapid system reconfiguration.
Firmware & Application Updates: Enables convenient on-site firmware upgrades and application program backups via B&R Automation Studio.
Data Protection: Hardware ECC corrects up to 24 bits per 1024-byte block; power-fail protection prevents file system corruption during unexpected power outages.

Operational Features

Plug-and-play design requires no additional drivers for B&R touchscreens and compatible devices. SLC flash memory provides 100,000 erase/write cycles per block, ideal for frequent write operations in industrial touchscreen applications. Conformal coating protects against moisture, dust, and corrosion. Low power consumption minimizes the load on touchscreen power supplies.

Product Positioning

A high-capacity industrial storage solution for B&R touchscreens and mid-to-large automation systems. It is specifically designed to meet the storage demands of advanced visualization applications, offering larger capacity than lower-density 5CFCRD models while maintaining industrial-grade durability and temperature tolerance. Suited for mission-critical 24/7 operations in harsh industrial environments where consumer-grade storage devices fail.

4. Core Performance Parameters

Storage Performance

Capacity: 2 GB. Maximum sequential read speed: 18 MB/s. Maximum sequential write speed: 14 MB/s. Endurance: 100,000 erase/write cycles per block. Data retention: 10 years at 25°C.

Reliability Performance

Data reliability: <1 unrecoverable error per 10¹⁴ bits read. MTBF (Mean Time Between Failures): >3,000,000 hours at 25°C. Warranty: 12 months against manufacturing defects. Service life: >10 years under standard industrial use conditions. Lifetime monitoring support: Yes.

Environmental Performance

Operating temperature: -40°C to +80°C. Vibration resistance: 5 g. Shock resistance: 100 g. Ingress protection: IP30.

5. General Matching Accessories

Compatible Hardware

B&R Power Panel touchscreens (PP300, PP400, PP500 series), PPC300/PPC700/PPC725/PPC800 controllers, APC620/APC810/APC820 industrial PCs, and X20CP series PLCs.

Installation & Protection Accessories

ESD-safe storage cases (single/multi-card), CF slot dust covers (IP30-rated), contact cleaning kits, heat-resistant color-coded labeling tags, and replacement 50-pin connectors.

Software & Documentation

B&R Automation Studio (for formatting, backup/restore, and firmware updates), official product datasheet, user installation guide, and application notes for touchscreen storage integration.

6. Applicable Equipment and Industry Fields

Primary Applications

Industrial Touchscreens: B&R Power Panel series for machine visualization, operator control, and monitoring.
Machine Tools: CNC machining centers, multi-axis lathes (stores machining programs, tool parameters, and touchscreen HMI projects).
Packaging Machinery: Filling, cartoning, labeling equipment (recipe storage, production data logging, and touchscreen interface configurations).
Robotics: Robot cells, gantry systems (motion programs, fault logs, and operator touchscreen interfaces).
Process Automation: Food and beverage, pharmaceutical, chemical, water treatment (batch recipes, distributed data collection, and touchscreen monitoring stations).

Secondary Applications

Conveyors, injection molding machines, textile and printing equipment, and industrial PCs (system programs, operational records, and touchscreen visualization projects).

Compatibility Notes

Use only 3.3 V Type I CompactFlash cards; avoid mixing with 5 V or Type II cards. Handle with ESD protection to prevent electrostatic damage. Do not hot-swap the module while the touchscreen or controller is powered on. Regularly back up critical data to external storage devices to prevent data loss.

Contact Info