A06B-0116-B203
Description
2. Technical Specifications
Rated Voltage: AC 200V class
Insulation Class: Class F
Cooling Method: Natural air cooling
Operating Ambient Temperature: 0℃ ~ +55℃
Storage Temperature: -20℃ ~ +70℃
Relative Humidity: 10% ~ 90%, non-condensing
Protection Grade: Industrial dust-proof and oil-proof
Installation Type: Standard flange mounting
EMC Level: Industrial anti-electromagnetic interference grade
Continuous Operation: Support 24-hour long-term stable running
3. Product Features
Low inertia rotor design, fast response, excellent acceleration and deceleration performance.
High power density, strong overload capacity and stable continuous torque output.
Built-in high-resolution encoder, realizes high-precision closed-loop positioning control.
Optimized low cogging torque, smooth operation at micro-feed and low speed without crawling or jitter.
Industrial-grade insulation and sealed structure, good dustproof, oil resistance and long service life.
Standard mounting and interface size, fully compatible with original FANUC drive, direct replacement available.
4. Installation Instructions
Cut off all power of machine tool and servo system before installation.
Inspect motor appearance, flange, shaft and keyway for damage, deformation or rust.
Fix the motor on mechanical mounting surface with standard bolts, tighten evenly to ensure flatness.
Install coupling strictly ensure coaxiality between motor shaft and load shaft to avoid vibration and abnormal wear.
Connect power cable and encoder cable strictly according to wiring specifications.
Route cables properly, avoid sharp bending, heavy extrusion and crossing with high-voltage lines.
Recheck all mechanical fastenings and wiring connections.
Power on the system, complete servo initialization, origin calibration and no-load test operation.
5. Operation Precautions
Do not operate beyond rated voltage, speed and load range to prevent motor overheating and burnout.
Avoid frequent forward/reverse jogging in short time to reduce overcurrent impact and thermal overload.
Do not use in environments with heavy dust, oil mist, corrosive gas or water splash.
Keep reliable equipment grounding to prevent electric leakage and electromagnetic interference.
Do not disassemble motor shell, encoder and internal components without professional authorization.
Stop operation and cut off power immediately if abnormal noise, vibration, overheating or servo alarm occurs.
6. Maintenance and Storage
7. Quality Statement
A06B-0116-B203 complies with FANUC industrial manufacturing standards and electrical safety specifications.
All products pass dynamic balance test, performance test and aging test before delivery.
This manual is applicable to original and compatible replacement parts of A06B-0116-B203 servo motor.
Get a Quote