ABB 1TGB302003R0003 industrial gateway communication module
1TGB302003R0003 is an ABB industrial gateway communication module compatible with System 800xA, AC800M and AC800F DCS control systems. It works as protocol conversion bridge between field instruments, remote IO units and central controller, realizing cross-network data exchange for automation system networking. New original and tested spare modules are widely used for old control cabinet upgrading and system spare replacement in process industry projects.
Description
Product Introduction
1TGB302003R0003 is an ABB industrial gateway communication module compatible with System 800xA, AC800M and AC800F DCS control systems. It works as protocol conversion bridge between field instruments, remote IO units and central controller, realizing cross-network data exchange for automation system networking. New original and tested spare modules are widely used for old control cabinet upgrading and system spare replacement in process industry projects.
Model Definition
1TGB is exclusive part number prefix of ABB communication gateway series coding standard. 302003 represents core hardware specification of this multi-protocol gateway unit. Suffix R0003 stands for factory fixed hardware revision with default protocol configuration without customized program modification.
Technical Specifications
Rated auxiliary power supply is DC24V, maximum power consumption 20W. Operating ambient temperature ranges from -40℃ to +70℃, storage temperature -40℃~+85℃, applicable relative humidity 5%~95% under non-condensing condition. Protection grade IP30, DIN35 standard rail installation, overall dimension 240mm×160mm×64mm, net weight around 1.5kg. It supports SSL/TLS data encryption to guarantee transmission safety, complies with CE industrial certification standard.
Interface and Communication Configuration
Equipped with RJ45 Ethernet port, RS485 serial terminal and optional fiber communication interface on front panel. It supports mainstream industrial protocols including Modbus RTU, Modbus TCP, PROFINET, PROFIBUS DP, Ethernet/IP and BACnet for bidirectional protocol conversion between different bus networks. No extra expansion bus slot reserved, all parameter setting finished via upper computer configuration software through network connection.
Core Functions
Complete mutual conversion of different industrial communication protocols to break data barrier between heterogeneous automation devices. Collect real-time operating data from on-site transmitters and IO modules then upload to DCS main controller, meanwhile download control commands from central system down to field-side equipment. Built-in fault diagnosis LED indicator to display power status, communication link abnormality and running failure in real time.
Application Scenarios
Mainly installed inside DCS control cabinets of thermal power, petrochemical, metallurgy and municipal water treatment industries. Applied for interconnection between site fieldbus equipment and central control system, as well as data docking between new and old different-brand automation systems during equipment renovation.
Operation and Maintenance Instructions
Cut off DC24V input power before module plugging, wiring or parameter modification and wait residual voltage fully discharged. Implement routine maintenance every six months, wipe module shell and terminal dust with dry compressed air and check fastening condition of wiring terminals regularly. When communication interruption occurs, firstly inspect power supply stability and network cable connection status before replacing the gateway module.
Get a Quote